0
wall tiles are used on walls. floor tiles are used on floors. if you want to interchange. you can make the wall tile as floor tile and vice-versa
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Should you install ceramic floor or wall tiles first?
Having tiles untold bathrooms I always do the floor LAST this saves dropping tiles etc on to the nice new expensive tile. However, when tiling the walls first leave out the bottom row of wall tile (here you can place your straight edge datum, put in the floor tile then set that last row of wall tile and leave a 1/8" gap between the floor and wall tiles and fill with same water proof grout as the floor tiles have
What is the difference of a gully trap drain from a floor drain?
The difference between a gully trap drain and a floor drain is placement. A floor drain is in a floor, a gully trap drain goes on an external wall.
Can you use floor tile adhesive for wall tiles?
You could but it's not advisableWall tile adhesive is thicker so it won't run down the wall and the tiles are less likely to slipANS 2 - I have done this a few times. If you use tile spacers, no problem.
What is the difference between true and level in building trades?
The terms "true" and "level" are very important when building or repairing any structure, whether it be a wall, a roof, a ceiling, or anything in between. Let us break down what we know of these two terms: "Level" - When each part of a particular structure (floor, wall, roof, etc.) is the same height, width, or depth as any other independent part of the same structure. Picture placing down tile, if there are lots of dips and hills in your subfloor, your tile will not lay correctly making the grout or even the tile crack, this is unlevel. "True" - When each part of a particular structure (see above) are not the same height, but share a common different slope and/or when two different parts (a wall and a floor) are not level but still meet each other all the way around - i.e: no gaps between the floor and wall. Picture placing tile again, only this time on a floor which has a grade which is 1 inch higher on one side of the room than the other. This slope may be intended, so the subfloor is not "level" but is "true" in the sense that one side of the subfloor is substantially lower than the other, but is consistent across the width of the entire floor, creating an intended slope. There are many other examples of "level" and true" in the building world, but this summation should be enough to answer the stated question.
Can you use wall tile grout on floor tiles?
You can. It is less gritty but it works. Edit - While this is true, it's important to understand the wall grout is designed for thinner grout lines, so if you use it on the floor, make sure your grout lines are thin. Otherwise, the grout will crack.
What is the difference between a tile setter and a tile finisher?
The difference is a tile finisher preps the floor/wall or any thing that the tile is going to be put on and a tile setter is the man or woman that sets the tile in place wear they need to be...just a quick basic run down .!
Should you install ceramic floor or wall tiles first?
Having tiles untold bathrooms I always do the floor LAST this saves dropping tiles etc on to the nice new expensive tile. However, when tiling the walls first leave out the bottom row of wall tile (here you can place your straight edge datum, put in the floor tile then set that last row of wall tile and leave a 1/8" gap between the floor and wall tiles and fill with same water proof grout as the floor tiles have
How do you add floors on sims 3 PC?
First you have to add a staircase. then you must press the "move up floor" button then put a wall around the second floor on top of the first floor wall. then you place in floor tile. You might have to put in floor tile before the wall. You can always change the kind of floor tile later. I hope i helped.
How you can tell floor tile from wall tile if its not in a box?
Floor tile are always thicker and the clay the tile is made from on the back of the tile will be dark. I'm sure that's right but can't back it up with proof.
What is the tile piece that connects wall tile to floor tile?
Tile trim is the piece that joins two tiled portions that are parallel to one another, such as a wall and a floor. This group of tile trim corner pieces highlights a particularly challenging installation site and offers some very lovely possibilities.
Can you install wall tile on the floor?
It is certainly possible to tile a floor, but bear in mind, there is much more pressure placed on the floor than on the walls, and floor tile must be laid over a solid cement base, otherwise it is going to crack.
How you say 'tile' in Spanish?
teja (on roof); baldosa (on floor); azulejo (on wall)
What does the abbreviation CTW mean in a kitchen floor plan?
Ceramic Tile Wall.
What is the difference of a gully trap drain from a floor drain?
The difference between a gully trap drain and a floor drain is placement. A floor drain is in a floor, a gully trap drain goes on an external wall.
What are some creative uses for leftover vinyl floor tile?
There are many practical and creative ways to use leftover vinyl floor tile. One can use leftover vinyl floor tile as pieces of art for a wall, as well as for furniture decorations and additions.
Is there a standard height for bathroom wall tile?
Generally, in the 4'-5' from floor range.
Can you use floor tile on the wall on top of old 4x4 tile?
I wouldn't recommend it. Most wall tiles are very smooth and wouldn't have any grit for the thin-set to adhere to.
