The fuse rating should be 5 amps
The appliance will not work because the fuse will blow every time.
If you are referring to the standard plug used in the UK, then the maximum rating fuse is 13 A, which can supply a load of approximately 3 kW. But the fuse fitted must match the power-rating of the load, so lower-rated fuses are available; for example, a 3-A fuse can supply up to about 700 W.
That depends on your car. You should check the manual. If it's not explicitly mentioned, you should check in the manual which fuse belongs to the accessory supply and then check the rating of that fuse in the fuse box.
Yes you can do that as long as it will fit in the fuseholder. It is acceptable to replace a lower Voltage Rated fuse with a higher but NEVER replace a higher with a lower. There are several things to consider when replacing a fuse: 1) The minimum voltage rating of the fuse is equal to or higher than the voltage of the circuit you are placing it in 2) The Amperage rating of the fuse does not exceed the capacity of the circuit you are trying to protect. Always replace a fuse with one that has the same amperage rating. 3) The interrupting rating of the fuse is sufficent for the capacity of the circuit supplying the fuse. If replacing a fuse always use one with an interrupting capacity equal to or greater than the fuse you are replacing.
Yes, providing the phase is the same. but you can't do the other way around, or breaker will immediately pop, or fuse will blow.
The appliance will not work because the fuse will blow every time.
A fuse is given a various rating (strength). For instance, a home appliance (washing machine, etc) would usually have a fuse with a 13 amp rating. While a low powered lamp would only merit a 2 or 5 amp fuse rating. It is important to use a fuse of the correct rating in amps for each electrical appliance.
The fuse is rated to protect the equipment, the supply, and you. Change the fuse for a higher rating and you compromise your safety and equipment and supply safety; increasing the risk of electric shock and of fire.
If you are referring to the standard plug used in the UK, then the maximum rating fuse is 13 A, which can supply a load of approximately 3 kW. But the fuse fitted must match the power-rating of the load, so lower-rated fuses are available; for example, a 3-A fuse can supply up to about 700 W.
That depends on your car. You should check the manual. If it's not explicitly mentioned, you should check in the manual which fuse belongs to the accessory supply and then check the rating of that fuse in the fuse box.
The fuse wire is rated for a specific amount of amperage. If the amperage exceeds that rating, the fuse wire will quickly melt. The current flow in the circuit is interrupted, thereby protecting the appliance from an overload condition.
A fuse link will melt and interrupt the flow of current to the appliance before it can get high enough to damage the appliance or wiring.
Yes you can do that as long as it will fit in the fuseholder. It is acceptable to replace a lower Voltage Rated fuse with a higher but NEVER replace a higher with a lower. There are several things to consider when replacing a fuse: 1) The minimum voltage rating of the fuse is equal to or higher than the voltage of the circuit you are placing it in 2) The Amperage rating of the fuse does not exceed the capacity of the circuit you are trying to protect. Always replace a fuse with one that has the same amperage rating. 3) The interrupting rating of the fuse is sufficent for the capacity of the circuit supplying the fuse. If replacing a fuse always use one with an interrupting capacity equal to or greater than the fuse you are replacing.
If I understood your question correctly, 'If you know the power rating of an appliance and the voltage of the line it is attached to, can you calculate the current used by the appliance?' You are looking for this equation: I = Current (Amps) P = Power Rating (Watts) V = Voltage (Volts) I = P/V This equation is useful when calculating the fuse rating for an appliance. For example, and appliance rated at 2400 watts, supplied with 240 volts has a 10 amp maximum. I = 2400/240 however, when it comes to paying for electricity, the energy is measured in units, which can be found using the equation: P = Power (kW) t = Time (Hours) Energy Used (Units) = Pt for example, an appliance rated at 2 kW used for 3 hours, uses 6 units of energy. Units = 2*3
It is ok to use a fuse with a higher amperage rating and not ok to use a fuse with a smaller amperage rating why?
Yes, providing the phase is the same. but you can't do the other way around, or breaker will immediately pop, or fuse will blow.
No