0
It,s depending on years and type of engine but they were 160-180 cc as stock mode .
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is is the cc's and valve size for gm heads 10147898?
I have the same heads and from the info I found they 76cc heads with 1.72 intake valves
What is the combustion chamber size of a Chevy 350 stock head?
stock 350 heads are 72 or 74 cc
What is the chamber size of the stock heads on a 305 engine - 1977 Monte Carlo?
58cc
Where is the intake air temperature sensor on a 1999 Dodge Dakota?
I believe it's sticking out of the intake manifold somewhere depending on the engine size. yeah if it's a v8 it should be on the number two intake runner
What size intake runner on Chevy head casting?
There were several different configurations produced over the years, ranging from about 150cc's to as much as 185cc's.
What is the valve size in your set of heads?
Depends on the heads. The size is different for the exhaust valve and the intake valve, and different engines have different size valves. The valves are mechanical devices in the engine heads that open and close. The intake valve opens to let the air/gas mixture into the combustion chamber,. Both valves close the combustion chamber during the compression stroke, and the exhaust valve opens to let the burnt gas out during the exhaust stroke.
What are 202 Chevrolet Heads?
202 refers to the intake valve size, as in 2.02 inches, upgrading to 202 heads is a very common way to gain horsepower, but usually requires upgrading the intake (better intake manifold and a better carb) and installing headers, to make the most of it. even installing a new highperformance camshaft
The right torque for a Chevy intake with aluminum heads?
I believe the torque is figured on the bolt size, not the material. you are using steel bolts ,therefore the torque for an intake bolt on a sm. block is 20 ft. lbs.
How much powerwill a 355?
never know until you get it on a dyno. And what mods have been made. Such as intake/exhaust porting have been done. what size heads it has or whatever.
Will a block from a 350 5.7 work with heads from a 305 5.0 and 305 intake 1998 If the 350 is not a vortec?
No it Has a different bolt pattern because of the engine size
Tire size 1996 4 runner?
This depends on which model. I own a 96 4runner limited v6 4x4. stock tires are 265/70/16. late
What size carb should you use on 350 Chevy LT1 with 202 heads?
most 202 valve heads have a 205cc intake runner,the old hot rodder rule,was to multiply this by 4 so 205x4=820cfm.with out being over carbed.so long as you have the exhaust flow open good.a respectable cam.and good ignition fire.i my self like a 750 dbl. pumper holley for this combo.keep in mind this,edlbrock builds good manifolds.but holley builds great carburators.
