Want this question answered?
There is not a quote "standard" door width as doors can be purchased in 2" increments. There are a few building code restrictions for minimum width of certain doors. Like an egress door is required to be 36 inches in width for a residence. There can also be minimum widths for handicap accessibility. These doors in a house need to have a clear opening width of 30 inches.
From 1928 to 1930. Construction was started Sept. 19, 1928 and completed on May 28, 1930
I haven't kept up with building codes in a number of years, but believe it was 36" minimum landing at bottom or top of stairs. You need to check out the National Building Code to verify. You can Google this information online,check for a copy at your local library or make a call to your local building department.Located a 2009 edition of the IRC-InternationalResidential Code on Stairways. You still need to verify that this information is current and suggest you contact your local building department.STAIRWAYS46. LANDINGS. Section R311 IRC 2009R311.7.5 Landings for stairways.There shall be a floor or landing at the top and bottom of each stairway.Exception:A floor or landing is not required at the top of an interior flight of stairs, including stairs in an enclosed garage, provided a door does not swing over the stairs. A flight of stairs shall not have a vertical rise larger than 12 feet (3658 mm) between floor levels or landings. The width of each landing shall not be less than the width of the stairway served. Every landing shall have a minimum dimension of 36 inches (914 mm) measured in the direction of travel.R311.3 Floors and landings at exterior doors.There shall be a landing or floor on each side of each exterior door. The width of each landing shall not be less than the door served. Every landing shall have a minimum dimension of 36 inches...
It's usually the very base of a structure that bears and distributes the total weight of the building. It's usually concrete of varying thickness and width depending on the weight it has to carry and usually contains rebar for additional strength
The depth and width of a footer for a concrete pad will depend on various factors such as the load that will be placed on the pad, soil conditions, and local building codes. Generally, footers are often at least 12 inches deep and extend beyond the pad on each side by at least 6 inches. It is recommended to consult a structural engineer or local building authority for specific requirements for your project.
Residential building codes vary substantially from municipality to municipality and should be checked locally, but at minimum a hallway width should be no less than 36 inches.
Building codes for a single family dwelling typically require hallways to be a minimum of 3 ft (36 inches) in width. A hallway that is 5 ft (60 inches) in width comfortably allows for the passage of two people. As a side note, the width of a typical wheelchair is 22 inches.
48 inches
the width required for building code space is a minimum of 30 inches.
3 feet.
3 feet.
30" wide X 60" long.
Answer
That actually depends on the building type but averagely the width should be about 1.2m and the breadth about 1.75m
21 feet
3 feet
Length is 3/4 of 36 ie 27 ft, width is 9 ft