The min thickness should be stamped on the backside of the rotor, pull and examine.
The minimum brake rotor thickness for the front and back rotors on a 1992 Honda Accord is 21mm. Rotors which are below this thickness will not offer adequate or reliable braking.
The minimum thickness number should be cast into the rotor.
The minimum brake rotor thickness for a 1994 Ford Thunderbird car is .974 inches for the front rotors and .657 inches for the rear rotors.
Minimum disc thickness vented front 24.6mm .Minimum disc thickness rear 16.6mm. min pad thickness front & rear 1mm
The minimum thickness on the front rotors for a 1994 Mustang Cobra?æis .97 inches. The minimum thickness on the rear rotors is .50 inches.?æ
The minimum wear or discard thickness is cast into either the front or backside of the rotor
What is the minimum rotor thickness of the front and rear brake rotors on an '03 VW Jetta TDI?
The minimum thickness or a front brake rotor to be turned is one quarter of an inch. If the brake rotor is less than a quarter of eight inch. It must be discarded.
Should be stamped on rotor Should be stamped on rotor
What are the brake rotors minimum thickness on a 1997 Buick Century? Thanking you in advance.
The brake rotor minimum thickness is .060 This applies to either the 2.3CL or 3.0CL, front or rear rotors. Seems awfully thin for a brake rotor, doesn't it? Other sources say .83 in. (21mm)front, .35 in. (9mm) rear [AcuraFixerDave] That rotor thickness is probably the BRAKE PAD thickness minimum, not including the steel backing plate [AcuraFixerDave].
The minimum rotor thickness for a 1992 Saturn SL2 is .625 inches for the front and .350 inches for the rear if equipped with rear disc brakes.