Concrete deck and or terracotta paver's work well As well as simple harwood decking if you prefer a natural look
Nothing, the coping should slope back away from the pool
If the decking shifts,rises and moves it will push on the coping of the pool. Also, this helps keep water from under the pool and if the ground has moisture until it and freezes then it cause the deck to rise.
Scrub it down with fresh water and a stiff broom or brush
The concept of plastic decking is used for many reasons. The material the decking is made from is materials that do not shrink or swell like wood. It also resists insects and does not need any type of water repellant or stains.
nothing
Firstly, you should only have water that is treated with salt - not 'saltwater'. Pool water will always leave deposits in the pool and the surrounding area. If the coping is correctly sealed with a high quality stone sealer it will be fine if it's kept clean and deposits are hosed and bushed off on a regular basis. I'd also suggest sealing the sandstone coping a couple of times a year.
Yes, it is possible to replace pool coping. Pool coping is the material that covers the top edge of the pool structure and serves both functional and aesthetic purposes. Over time, coping may deteriorate, become damaged, or simply need an update to improve the pool's appearance or functionality. Here are the basic steps involved in replacing pool coping: Assessment: Begin by assessing the condition of the existing pool coping. Determine if it can be repaired or if a complete replacement is necessary. Choose New Coping Material: Select the new coping material that suits your preferences and budget. Common pool coping materials include natural stone, concrete, brick, and pavers. Ensure that the chosen material is appropriate for pool use and complements your pool's design. Remove Existing Coping: If replacement is required, carefully remove the old coping material. This may involve using tools such as a chisel or a jackhammer to break up and remove the old coping. Prepare the Substrate: Ensure that the pool's edge and surrounding area are properly prepared. This may involve leveling the substrate, repairing any damage, and creating a smooth, stable surface for the new coping. Install New Coping: Lay the new coping material in place, starting from one end and working your way around the pool. Use mortar or adhesive appropriate for the chosen material to secure the coping in position. Grout and Seal: Once the coping is in place, grout the joints between the coping pieces to create a seamless appearance. Seal the coping to protect it from water, UV rays, and other environmental factors. Finish and Clean: After the grout and sealant have set, clean the pool coping and the surrounding area thoroughly. Ensure that the pool is ready for use. It's essential to hire a professional with experience in pool coping installation if you're not confident in your ability to complete the job correctly. Proper installation is crucial for the safety, longevity, and appearance of your pool coping.
Temperature of water should be around 100oC.
Yes, Water should be replaced to normal operating level ,Which would be halfway up the opening of your Skimmers. Normally Center of tile line On 6 Inch tile bands or 3" below the bottom of your Coping.
Replace the tiles. Makes it easier to clean the water line. Stains and oils will be permanent if you don't. k
The vision of a pool with shimmering, clean water can be a welcome sight when temperatures are soaring. Not only can a pool offer refreshing relief from the hot summer sun, it can also be transformed into a complete entertainment area. This can be done easily with the addition of pool decking. Pool decking added to an existing pool area can create a whole new atmosphere. This addition can include an area for sitting or sunbathing alongside the water, a cooking area or any other entertainment feature. The possibilities are endless.
Around 100