0
Battle of Phase Line Bullet happened on 1991-02-26.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
When did Battle of Metaxas Line happen?
Battle of Metaxas Line happened on 1941-04-09.
Is transmission voltage a phase to phase voltage or a phase to ground voltage?
Phase to Phase voltageCorrection to the above answer:There is no such thing as a 'phase-to-phase' or 'phase-to-ground' voltage. The correct terms are 'line-to-line' (or 'line voltage') and 'line-to-ground' (or 'phase voltage'). Transmission-line voltages are line-to-line (or 'line') voltages.
What phase does the division of chromosomes happen?
Chromosomes will line up in metaphase and in anaphase they will split apart.
In three phase current the phase to phase is connected what will be happen?
If two phases are shorted together, you will get a phase to phase fault, which will cause protective devices to operate (fuses, relays, breakers, etc.).CommentThere is no such thing as a 'phase-to-phase' voltage, although the term is frequently, but misguidedly, used in the field. The correct term is 'line-to-line' voltage, because phases exist between lines.
Write dowen the relationshipbetween line and phase the 3phase system if voltageline and currentline are line value voltage power and current power are phase value?
A-for star connectionE(line)=1.73E(Phase)I(line)=I(Phase)&B-for delta connectionE(line)=E(Phase)I(line)=1.73I(Phase)
Why do you have voltage to ground but not voltage phase to phase?
There is phase to phase voltage in 3 phase system.AnswerYou don't get voltage 'phase-to-phase'; it's 'line-to-line'!
Is 220V line voltage or phase voltage?
Phase, if you are referring to line, as power line from pole.
If in the three phase connection phase to phase voltage is 400v what will be the phase neutral voltage?
The formula to use is, phase voltage /1.73 = phase to neutral (ground) voltage.CommentThere is no such thing as a 'phase to phase', or 'phase to neutral' voltage. The correct terms are 'line to line' and 'line to neutral'. So the above answer should read: line voltage/1.73= line to neutral voltage = phase voltage.
What will happen if single phase load is connected to three phase circuit?
To obtain a single-phase supply from a three-phase supply, the single-phase load must be connected either (a) between any pair of line conductors, or (b) between any line conductor and the neutral conductor. Of course, the voltage obtained from either of these connections must match the voltage rating of the load.
In three phase current the phase to phase is connected what will happen?
This is called a "line-to-line" short and it will trip either the main circuit breaker in the panel, or the fuse protecting the panel. It might also result in personal injury if someone is in contact with the equipment when the short happens. Equipment or damage is also possible.
What is the Phase to phase voltage of 66KV earthed cable?
Nominal transmission and distribution voltages are line voltages. So '66 kV' is a line-to-line voltage. Note that there is no such thing as a 'phase-to-phase' voltage -the correct term is 'line-to-line'. Using the term, 'phase-to-phase', indicates a lack of understanding of a.c., which is not uncommon! Incidentally, the symbol is 'kV', not 'KV'.
Can an electrical short be caused a phase to a phase?
It could be a phase to phase, ph to neutral or earth fault. In single ph wiring ph to ph exhibits no short ckt faultAnswerYes, but you have got the terminology wrong. There is no such thing as 'phase-to-phase', the correct term being 'line-to-line'. So you can have a short circuit as a result of a line-to-line fault, a line-to-neutral fault, or a line-to-earth fault.
