because it can harm you or your clothes so you should never play around with half open burners they let out blue flame which is very dangerous because it is the dirtiest falme
A gentle flame is not too hot and not too cold, the air hole should be half open for a gentle flame and it makes a hissing sound. Hope this helps- :D xx
The four(4) flame types of Bunsen burner is depending on flow through the throat holes (holes on the side of the Bunsen burner -- not to be confused with the needle valve for gas flow adjustment). 1) air hole closed (Safety flame used for when not in use or lighting). 2) air hole slightly open. 3) air hole half open. 4) air hole almost fully open (this is the roaring blue flame).
Atleast a half hour.
You do the same test as you would have done in year 7, the pop test. Invert a test tube and fill partially with the gas then place a lit match or candle at the bottom if you hear a pop you have hydrogen. just don't be like my old teacher and fill it to the point half the room catches fire. Hope this helps
The size of the plan mirror should be half the size of the object to get a full size image of the object
Orange??
It is steady.
Looking at it is one option
Largeley blue but with yellow bits.
A hot flame is obtained (but not the hottest) with a color violet-white.
because it can harm you or your clothes so you should never play around with half open burners they let out blue flame which is very dangerous because it is the dirtiest falmeRead more: When_should_you_use_a_Bunsen_burner_with_the_collar_half_open
When the hole of a Bunsen burner is half closed (or half open) the flame is mostly blue-violet in color throughout, with no orange/yellow apparent as it would be with the hole fully closed. When the hole is fully open, the flame divides into a pale voilet color outer part with a cone of intense blue color within.
A gentle flame is not too hot and not too cold, the air hole should be half open for a gentle flame and it makes a hissing sound. Hope this helps- :D xx
The four(4) flame types of Bunsen burner is depending on flow through the throat holes (holes on the side of the Bunsen burner -- not to be confused with the needle valve for gas flow adjustment). 1) air hole closed (Safety flame used for when not in use or lighting). 2) air hole slightly open. 3) air hole half open. 4) air hole almost fully open (this is the roaring blue flame).
because you have the vents open on the bunsen burner the flame is getting more oxygen, making it hotter. Different flame types of Bunsen burner depending on flow through the throat holes (holes on the side of the Bunsen burner -- not to be confused with the needle valve for gas flow adjustment). 1) air hole closed (Safety flame used for when not in use or lighting). 2) air hole slightly open. 3) air hole half open. 4) air hole almost fully open (this is the roaring blue flame).
i did this in a lab using methods of solution, filtration and evaporation : add dilute sulphuric acid to the solid/solid mixture ..heat on a Bunsen burner till bubbles appear then filter the solution, collect the filtrate in an evaporating dish and heat on a Bunsen burner until most the water evaporates or half the filtrate has evaporated .....remove the dish from the burner and leave it on a flat undisturbed surface for 48hrs to allow crystallization.
Check that the valve is half open, light the match, and turn on the gas to the appropriate level.