answersLogoWhite

0


Best Answer

The codes are: P0172 System too rich Bank 1 P0175 System too rich Bank 2 P1443 Small or no Purge Flow Condition

The first thing to do is to check the fuel pressure. If it is too high, it will cause the engine to run rich. You may have a bad fuel pressure regulator.

The Throttle Position Sensor (TPS) could be causing the problem as well. There is a procedure for testing the TPS, but it is rather lengthy. If you go to the Public Library, you can get the MOTORS Manual for your vehicle in the reference section. That will have the test procedure.

Another possibility is a bad Coolant Temperature Sensor (CTS). This is a common problem.

You, also, can not discount the possibility of a bad PCM as well. Just don't throw parts at the problem. You would be better off paying a pro.

Also check the mass air flow sensor. If it gets dirty a false reading to the PCM could richen the injectors. Did you check you air filter??

User Avatar

Wiki User

10y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Where can one find what repairs need to be done for diagnostic codes that came up on your 1997 Ford Thunder-bird LX of P0172 P175 and P1443 at for free?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What does the code P1443 mean on a 1997 Cougar?

The above is copied and pasted from "The Thunderbird And Cougar Owners Club of America" "Straight from the service CD (mostly, I added a descriptor after the code) P1443=A problem with the EVAP purge flow system Continuous Memory Diagnostic Trouble Code (DTC) P1443 indicates an incorrect evaporative system purge control valve flow. Possible causes: -- Obstructed, open or cracked hoses between EVAP canister purge valve and intake manifold. -- Damaged EVAP canister purge valve. -- Damaged PF sensor."


If a 1997 ford mustang shows a code P1443 how do you fix this?

Code P1443 is idle air Control (IAC) valve Speed fault


What is code p1443 Hyundai Sonata 2000?

P1443 EVAP System - Tank Cap Missing Mostly it may be damaged. usually appears with code P0455


Why is check engine light on my ford thunderbird 1996 computer reading code p1443?

I had my check engine light come on in my 96 T'bird and I stopped at Autozone to get it checked. I got the P1443 error as well, and it said probable causes were: 1. Failed EVAP pressure sensor 2. Blocked hose between purge valve and FTP sensor 3. EVAP purge valve stuck closed I have read from others that say it could be just a cracked hose as well.


What does code p1443 mean?

P1443 Evaporative Emission Control System - Vacuum System - Purge Control Solenoid or Purge Control Valve fault Loose or defective gas cap will cause this code.


What does the code P1443 and or 420 mean on a 96 Ford Escort?

The p1443 code means a problem with the evaporative emissions system. There could be a problem with a broken or unhooked vacuum hose. Also could be a problem with the solenoid or sensor between throttle body and evaporative canister.


Voltage diagram to emission solenoid ford aerostar?

P1443 code evap emissions control malfuction no voltage at solenoid.


How do you fix a check engine light code p1443 on a 1996 mercury cougar?

Follow the troubleshooting tree that is associated with that code.


How do you fix a 1996 Ford Escort that is receiving 2 error codes P0402 and P1443?

P0402 Exhaust Gas Recirculation Flow Excessive Detected I do not recognize P1443 Instead of throwing parts at the problem, which can be many things. Take it to a professional who you trust, that has the knowledge to diagnose the problem and know what is wrong without guessing. Cheaper in the long run.


Code p1443 and changed the canister purge valve but check engine light still on?

you need to unhook your negative cable for a few that will reset>


How do you fix trouble code P1443 on a 1997 ford ranger?

Diagnostic Trouble Code (DTC) P1443 indicates a failure in the EVAP canister purge valve circuit. The Evaporative Emissions (EVAP) Canister Purge (CP) valve controls the flow of vapors from the fuel vapor storage canister to the intake manifold during various engine operating modes. It may need nothing more than a good cleaning, vacuum hose connected or that is leaking, or may need more. I suggest you seek out the services of a good mechanic. Do not just throw parts at this. The code does not mean that any part needs replacing. It just means the EVAP system is being effected.


What does code P1443 MEAN in my 1996 FORD aerostar 4.0 l engine?

My book shows it to mean: Evaporative purge flow sensor fault.