0
Add your answer:
Earn +20 pts
Is a tension wrench and an Alan wrench the same thing?
No. It is not.
What must you never do with a tension wrench?
Hit someone!
How do you take the tension off the serpentine belt on 1998 Buick Park Avenue?
Put the proper size wrench or socket on the pulley of the tensioner.Pull the wrench counter clockwise to release the tension on the belt.
How do you change a serpentine belt on a Pontiac Vibe?
you have to buy a special wrench, buy a new belt, stick wrench under hood to a nut that will loosen the old belt, take old belt off, pull on wrench again, feed belt back onto pulleys (draw a diagram first so you know how to reinstall it), remove wrench, done! You do NOT need a special wrench (at least for '03-06). You do need a 17mm wrench or socket to release the tension of the tensioner pulley so you can slip off/on the belt.
What can you substitute for a tension wrench when picking your locks?
A paperclip (look on youtube how to do it).
How do you release the tension to install the serpentine belt on a suzuki aerio?
15 mm wrench Put it on the tension pulley and pull to take tension off belt
How do you adjust the belt tension for a 98 Accord to replace the alternator?
Apply a wrench to the center bolt on the pully and turn it will adjust the tension.
How do you relieve tension on serpentine belt of 97 buick park?
put a wrench on the tensioner pully and pull it to release tension on the belt
How do you replace a BMW E36 alternator belt?
Release the tension using a wrench etc from the idler pulley.
How do you make a tension wrench out of ordinary sized paper clips?
You can make a tension wrench out of a paper clip, but you will not have as much control over pressure at the sheer line as you would if you used spring steel or some other more appropriate material. If you already know how to pick locks, then you already know what you need to make a tension wrench. If you do not know how to pick locks, this is the wrong place to try to learn, because how to pick locks probably is an inappropriate topic here.
How do you put on alternator belt on 90 Honda civic?
You need to line up you belt with the pulley except for the tensioner pulley according to the picture in your engine bay. You will need to put a wrench on your tensioner pulley and twist it to relieve the tension then slip the belt on and let off the wrench to return the tension.
2006 Toyota corolla serpentine belt replacement?
YOU WILL NEED A SPECIAL TOOL FROM TOYOTA FOR THE TENSION ARM. It's called a "wrench". You can buy them other places, too. If you look at the tensioner arm assembly (at the back of the engine compartment), just above and inboard of the bolt that connects the assembly to the engine block is a hex-nut shaped protrusion. Slide a socket onto this with either a socket wrench or a breaker part. Pull the wrench toward the front of the car. This will release the tension on the belt so that you can slip it off. Installation of the new belt is the reverse of the removal. It's usually recommend to apply tension to the new belt slowly instead of just letting it snap back.
