0
If you mean the air conditioner, back of the passenger side under the hood by the firewall.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
1997 Lincoln mark viii transmission?
True, just the line pressure is lower!
How do you fix a pin hole in brake line on 1994 Lincoln mark viii?
You have to change the line, too much pressure to do anything else.
Where is the fuel line located in a 1996 Lincoln mark viii?
Follow from tank
Where can you find an on-line list of replacement interior and exterior bulbs for a 1995 Lincoln mark viii?
you may want to try jcwhitney.com; it's an automotive parts magazine
How much oil does a 1994 Lincoln Mark VIII take?
With the filter, some people say that 6 1/2 qts. and mine takes 7 qts. to get to the full line.
Where can you find an on-line fuse guide for a 96 Lincoln Mark VIII?
Don't know of one on- line but your local Lincoln-Ford dealer might make a copy of the page for you in the parts department, mine has done it before for a tranmission diagram, it's worth a try, that's if you have one close.
Why would your 1994 Lincoln town car turn over but not start fuel filter replaced fuel line open and ignition turned on no flow from tank is this normal What might be problem?
Check the crank sensor. This what happened on my 1994 Lincoln Mark VIII.
Where is the air conditioning low pressure line on a 1995 Lincoln town car?
Larger line from A/C compressor is the low pressure line
Where is the thermal expansion valve on a Lincoln mark vii?
its built into the liquid line(high pressure) it is half metal half black plastic goes to condenser pass side
Where is the neutral safety switch located and how do you change it on a 1995 Lincoln Mark VIII?
Drivers side of the transmission, remove the electrical connection, remove two bolts, and remove. Make sure the line on the switch is lined up before bolting it up.
Will mark vii coil springs fit on my 97 mark viii?
no they wont fit look on line for strutmasters.com they have conversion kits for cheap probally like 200 usd
Lincoln Mark VIII no heat?
If it's a 97 to 98 then it's probably the Blend Door actuator that is broken. If it's the first generation Mark, 93-96 check the vacuum line under the hood that goes across the intake manifold towards the back of the motor, blend door actuator broken, heater core shot.
