The window motor is located in the door. Remove the door panel carefully and you will see a sissor type device that holds the window and the motor. 4 rivets hold the motor to the door. There is a gear on the motor that meshes with the gear on the sissor device. Remove it as a unit. Once out then remove the 3 rivets that hold it together (USE EXTREME CAUTION - USE A VISE TO HOLD UNIT OR VISE GRIP PLIERS - IF NOT YOU CAN LOSE A COUPLE OF FINGERS WHEN IT SNAPS OPEN) Install the new motor with the supplied 3 bolts and reinstall into door.
The Oldsmobile Cutlass Cierra window lift motor is located inside of the door. Each window is equipped with a window lift motor.
How to remove the window motor from the regulator
Remove the wiper arm from your 1999 Oldsmobile Cutlass wiper motor. Remove the wiper motor wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.
Take the inside door panel off and the water deflector paper and you will be able to see the window motor.
apparently the window motor is bad and will need replaced.
Replacing a window motor in a 1999 Villager is quite easy. You will need to take the door panel off and unassembled the motor and put in the new motor.
Remove the inside door panel of your 1999 Mercury cougar. The entire window mechanism will be visible. Remove the wiring harness from the window motor. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install your new window motor.
you must determine weather the switch or window motor is bad and replace.
i bought my window motor from advance auto, they give a year warranty. take the old motor with you for core charge
How to replace a window and regulator on a 1998 checy malibu?
On a 1999 Olds Cutlass, the water pump is located in the engine compartment under the hood. It is on the motor on the passenger side of the vehicle.
It's not on a track, the 1999 Regal windows have cables, therefore, you will have to replace the window motor.