the pipe with the hot water will.]
The piping with cold water as many hydronic systems are over 100 years old and the piping looks as new as the day it was installedAs long as thermo stress and velocity are taken into consideration hot water lines can last longer then their cold countter parts as cold piping becomes more brittle over the yearsThat would depend on the application as some are larger then 48"
I would`nt... It serves no purpose. If the water is off there is no pressure when you turn on the tap, hot or cold, so you would be heating water you can`t use.
I would use hot water conn. on it. Both on cold and hot
It depends on the valve, who makes it and what model is it? you have a cross connection in the water system ( I don't think it is the value, most of the time it is on your washing machine hot and cold water valve. Go to a faucet away from the machine and turn on the water. Then go listen at the machine you should hear water going through the hot and cold water valve of the machine, it is where your water hoses connect.) hope this helps If it is a new house and has always done it. It might be that they connected the hot and cold water together somewhere in the wall. You would need a plumber to find it. It is not easy to find though. Would most likely be having to open up a lot of holes in wall to find. Sometimes you will find it by trying fixtures one at a time. The one that gets hotter quicker is where it was tied in with the cold. Open up wall there. Then turn on water at the fixture and feel the pipes and the one that is hotest that is tied to cold would be the one you would have to change. You would have to take pipes apart and connect it back to the hot side. So you would be taking hot and cold apart so i would get plumber to do this. At least if you could find out where they were connected would save you a lot of money.
The simplest answer would be that the screen in the spout is clogged.
the heat from hot water will heat the pipe, loosening the bonds between the molecules in the pipe and allowing for more oxygen molecules to enter, creating more rust much faster. cold water will do the opposite; it will make the bonds tighter and allow LESS oxygen in.
Corrosion is a chemical reaction. The vast majority of chemical reactions are speeded up by the input of heat. The energy from the heat causes the particles to move faster and thus react faster.
Solids dissolve a lot more quickly in hot water because the heat breaks up the particles more quickly, where as the cold would make the particles stay stronger/closer together :)
cold water does.
Heat speeds up chemical reactions. As corrosion is a chemical reaction, copper pipes at a higher temperature will corrode faster
pour cold water over it
Well, between cold water and cold water.... I would have to say, Cold water 1) You mean cold water or hot water, and 2) Neither. I would go for lukewarm water. 1) You mean cold water or hot water, and 2) Neither. I would go for lukewarm water.
AlpenWeiss
Both. Completely surround it in all directions with ice. Also, if it is a closed container, try submerging it in ice water with salt in it. It will get cold very quickly.
As the paint dries themoisture in the paint goes into the air and would tend to collect on the cold water pipe. Should stop fairly quickly.
No. Cold water absorbs more quickly into the body than warmer water, making chilled water preferable for hydration.
Raisins plump up more quickly in hot water because the molecules in hot water move quicker than molecules in cold water so the hot water molecules diffuse quicker into the raisin.