0
Why are ports that have pin connectors are described as a male and ports that have a hole connectors as female?
Wiki User
∙ 11y ago
Cus in the animal world females have holes and males have things that are made to go into those holes
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What is the hole in the back of your computer called?
Broke. There are interface connectors/ports, fan ports, and slots, for add on cards. All motherboard ports. If there is a hole with out some kind of port,it is not for anything.
Show a female hamster.?
A female hamster has a hole. A female hamster has a hole.
How many hole in female virgina?
2
Why does a male rabbit go in a female rabbits hole?
normally if a buck( male rabbit) goes into a does (female rabbit) hole it is most likely trying to mate with it.
Who knows the whole description of blackholes?
Description: the whole hole is described as hole-like, meaning an abyss of darkness. Darkness is associated with the color black. That is the whole hole truth.
What is a female plug?
A female plug is a plug where there is a hole. To connect to a male cable, insert the male cable into the female one.
What if your male cat has a female hole?
It is ether a cat that is both genders or it is ether a female cat
What female hole do you enter sperm in to have a baby?
The one up above the bum hole where your baby will come out
Where is the oil return ports for a Chevy 350 engine?
The oil return ports are located at each end of the heads near the short head bolts under the valve covers it's the hole at each end.
You did intake gaskets on your 3.1 and got the push rods mixed up how do they go?
The longer ones are the exhaust, they should go into the hole further away from the ports, the shorter ones are the intake, they go closer to the ports.
How do I change the draw length on a youth compound bow?
Draw the bow to full draw and hold it. Have your assistant place a nail in the small round hole in the bottom of each pulley wheel and then slowly let the pressure off of the bow string. Unhook the looped bowstring from the metal string connectors and set aside. Slide the connectors up and away from the bow limbs and pull them out of the pulley wheels. Move the connectors to a new hole or position on the wheels (a higher hole if you want the draw length shorter or a lower hole if you want the draw length longer). Reconnect the string to the metal string connectors and draw the bow to full draw again. Have your assistant pull the nails out of the pulley wheels and then let the bow down slowly. This process can also be performed by using a bow press to depress the bow's limbs and then changing the draw length in the same manner.
How does a hippo courtship?
They fight over water hole's to impress the female's .
