My tv went to black and white when I switched it on yesterday, so I read on the internet blog somewhere to unplug for 15 mins and then plug back on and switch on. I did this but left it for 20 mins or more and presto the tv was in colour when i switched it back on. magic!!
If this is a cathode ray tube the tube has three electron guns one red one green and one blue. If the green one fails all images will appear red pink or blue tinged.
If the red blue effect is inone patch on the crt which doesnt move then it may have been exposed to a magnetic field. The only way of fixing this fault is to use a degaussing loop.
Because light's primary colors are red, green, and blue. You should go to a person how knows a lot about technical stuff because when the TV shows light's primary colors only, the TV has a problem.
Depending on the type of TV you have, Sony or not, it could be from several different causes: 1. Shorting CRT. 2. CRT/LCD/DLP/Plasma driver circuit failure. 3. Loose RGB cable (at either end)
It probably means the input is not connected
Without more information on what kind of TV it is and when this happens, I'm going to have to give a generic answer:
There's something wrong with it. Take it to a repair facility.
Because its getting too hot
The duration of Turning Point - TV series - is 3600.0 seconds.
TV and radio don't need motors in order to do the job they're designed for. Almost none of them have motors, and the few that do have them, use them for functions that are largely unrelated to the basic functions of radio and TV, like running a fan to keep the electronics cool, turning the shaft of a detent tuner, turning a directional antenna, etc.
Might need a software update mine did mine is a jvc lt-42pm30 and it needed an update this update is supposed to fix tv turning off and on, picture freezing, tv going into service mode and other issues hope i helped
Turning Point - TV series - was created on 1994-01-06.
Turning Point - TV series - ended on 1999-06-17.
Flora wanted the dress pink and Merryweather wanted it blue
Auraglow
cause its blue if not what do you mean?
Yes, I have a TV with me and whenever I have it sitting like normal the colors for the volume and channel number are yellow, when on its side it turns white, and when its upside down it turns blue. But I have no idea what it does to actual TV you watch. It was just a simple test with a TV with no signal.
electricity
By turning it.off