0
Why doesn't water come on I checked circuit breaker and it keeps tripping when I turn the water on?
Wiki User
∙ 15y ago
What type of water system do u have? If on well water, maybe its your pump shorting out when you run the water.,check pump... but not sure. electrical and water can be dangerous. Good luck.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do I repair a Passenger side window that won't operate and the motor is still good on a 97 maxima?
if the the motor is good you need to check the circuit breaker because the circuit breaker might be the problem. window doesnt go bad my dude the motor goes bad check it again
What would cause your room air conditioner to stop turning on?
First try electrical - fuse box or circuit breaker. It may have a circuit breaker at the end of the cord/plug. Also, try connecting it directly to a wall socket - not into a power strip. If that doesnt work, you may need to call in a pro.
How is the breaker box wired in a 1993 oakwood mobile home?
The guest bedroom and bathroom electricity doesnt workHave checked all breakers and they all seem to work something, just not back wall of living room and guest roomsAns2 - An electrician (or competent handyman) with a circuit tracker and multi-meter would be able to find this problem, but not necessarily easily. -There is no other practical way.
Why does your electricity go out when you use too much electricity?
It is your fuse of circuit breaker cutting off the electricity so a fire doesnt start. It is actually helping you!Fires can start when too many plugs are plugged in to one outlet
Why SCR does not latch in AC circuit?
because it doesnt
How do you make adjustments to circuit components?
Joey doesnt share food
Why does your horn blow when you start your car?
it doesnt. you should get that checked it may be a problem with the relay
Your radio doesnt work you checked the connections and everythings properly in place What could be the problem?
fuse
When you drive it seems like your car doesnt have any pick up?
have your catalitic checked, it could be cloged.
Why circuit breakers do not trip even though there is a fault?
1. Maybe you are using more than you think. Hair dryers really suck a lot of juice. 2. You may have a low-amp breaker with a lot of outlets wired to it. 3. It really depends on how many amps are being pulled vs how many amps the breaker can handle. What you need to do is identify every light and outlet that is wired to that breaker. Next time the breaker trips, leave it off and start figuring this out. Identify every light that is no longer working. Then carry a lamp (better yet, a night-light) around your house and try it in every outlet, identifying the ones that don't work. Before you flip the breaker switch, look at the switch. It should tell you how many amps it can handle before it trips. Overhead light fixture generally suck about 2-3 amps. A celing fan another 2-3 (a combination ceiling fan with light kit, around 5). Add up all the fixtures you identified as being on that circuit, and that's how many amps you are pulling, even when nothing is plugged into an outlet on that circuit. Now, a general rule in electrical wiring is that you're not supposed to have fixtures and outlets on the same circuit. I don't think there's any real danger in doing that, but it just kind of makes it easier to keep everything organized. So it may or may not be true in your house. So you may not have any fixtures at all on the circuit. If you don't, then ignore the lights and ceiling fans. Your load on that circuit is whatever appliances you have plugged in and running at the time. If you DO have fixtures on the circuit, then you can add the amps from those fixtures. Growing up, I lived in a house where the kitchen, bathroom, and laundry room were all on the same circuit. That circuit must have been a huge number of amps to support all that. But nevertheless, if you turned on the hair dryer while the clothes dryer and bathroom vent were both on, it tripped the breaker every time. And the lights went out in all three rooms. Solutions? Well, if turning on your hair dryer is what causes the breaker to trip, you can try drying your hair when other things on that circuit are not operating. Or just plug your hair dryer in to an outlet that is not on that breaker. That's the easiest thing to do. You might also think about putting a bigger (more amps) breaker on that circuit in your breaker box (I suggest you don't do this yourself - hire an electrician). Another option is to change some of the outlets and/or fixtures to another circuit, one that doesnt have as much load on it. This will require some re-wiring, which, with a little bit of knowledge, you can do yourself. But if you are not comfortable with that, then again, hire an electrician. Overhead fixtures aren't so bad because the wiring is usually up in your attic. You just need to identify which wires are on which circuits and divert another circuit to include your fixtures. Also, you need to make sure that the old circuit is still continuous (if there was a fixture in between the breaker and an outlet, or between two outlets, and you took that fixture off the circuit, then you have to complete the circuit between the breaker and outlet, or between the two outlets, directly - make sense?). The thing that you have to keep in mind is that, while you are decreasing the load on one circuit, you are increasing the load on the other circuit, and you don't want to put so much on the other circuit that it starts to trip. Oh one warning. Anything that draw a LOT of amps, like a hair dryer or clothes dryer or chop saw, should never be plugged into any outlet that is on the same circuit with electronic devices (TVs, stereos, computers, DVD players). Even if it doesn't trip the breaker (a potential disaster for some electronics), the current change created by turning the high-amp appliance on and off can damage the sensitive components of such electronics. So-called "surge protectors" are not sufficient for protecting your electronic equipment from this - they only protect against minor fluctuations caused by slight changes in the current coming into your house.
What is binary cord?
Wire carrying negative and positive charges in a closed circuit. It doesnt have earth.
Why doesnt my 2003 civic blower motor turn on?
Have you checked the fuse and relay? - They are in the engine compartment above the passenger strut.
