Because - the pressure of the water inside the hose provides counter-pressure, making the hose more difficult to bend.
Speak your own language Get like five dollars a year tap tap tap tappy tap tap tap tapp tapp tap tappy tap tap I'd tap that..... rubber
Yes, rubber is available from the rubber tree. Grow or find a rubber tree, tap it and you can get all the rubber you want.
Yes, rubber is available from the rubber tree. Grow or find a rubber tree, tap it and you can get all the rubber you want.
Put the rubber tubing onto the gas tap Then turn on the gas tap
Get Johnny some milk and rubber.
Friction between water and hose slows the water.
Replace it.
Turn off the fuel tap and remove the fuel line. Connect a length of rubber hose (two feet or so should be sufficient) where the fuel line was, and put the other line in a gas can. Turn the tap on reserve. After it finishes draining this way, turn the tap off and lay the bike on its side let gravity drain the rest of the fuel.
To fix a bent auger on a snowthrower try to bend it back in place. Use a hammer and slowly and gently tap it back to its original shape.
Hard to really say but here:Clap Clap Tap tap Tap Clap Lift the cup then put it down clap clap the round edge of the cup bent down Tap Put the cup down then u can repeat this process.If
You have to tap into the heater hoses.
turn the tap on while fixing the hose the person will then tape the leaky hose up