please you give me reply to answer.
I assume a 3 phase, AC induction motor. A star delta starter or a soft starter can be used. A soft starter is better compared to a star delta starter, but it is more expensive.
With a transformer...
In manual star delta starter, the change over from star to delta does not happen automatically. The operator or user puts on the starter, and after few seconds he pushes a lever or handle to change over to Delta. In automatic method, change over happens from star to delta using an automatic preset timer.
delay timer
The use of a star delta starter is for motor control only and not resistive heating loads. This type of starter is used to dampen the inrush current by using a lower voltage to start the motor.
Check your Delta connections first if the phases is corresponding, and check your Circuit Breaker if it sufficiently rated.
On a star delta starter a motor overload or a motor going to ground and cause a short circuit will cause the overload protection to trip. These overloads have to be reset before the motor can be restarted.
There is many type of starter on three phase circuit but the most common are 1: D.O.L (Direct on line). 2: Manual Star Delta Starter. 3: Automatic Star Delta Starter.
I assume a 3 phase, AC induction motor. A star delta starter or a soft starter can be used. A soft starter is better compared to a star delta starter, but it is more expensive.
Less than 65 ohms
The Star-Delta control circuit diagram shows the delta contact and the main contact.
What do you mean by a 'parallel delta' circuit -is there such a connection.
With a transformer...
With a transformer...
connected to the starter
No difference. Y is used as a symbol to indicate the star connection.
Types of starters: 1. Direct on line starter 2. Autotransformer starter 3. Star Delta starter 4. Resistance starter 5. Fully automatic star delta starter 6. Series reactor starter