0
Por que tienes que preguntarle al maestro de motores 2 el chamo
Wiki User
∙ 13y ago
Wiki User
∙ 5y agoAuxiliary winding need not be in the circuit throughout, since it serves its purpose during the starting only.
Add your answer:
Earn +20 pts
What is difference between main winding and auxiliary winding?
In the case of a capacitor-start/run single-phase induction motor, the main field is provided by the main (running) winding, and the capacitive branch is the auxiliary winding. In the case of a capacitor-start motor, the main winding is the running winding and the auxiliary winding is the starting winding.
If the running winding and the auxiliary winding were connected in series would the motor run?
no
What is the number of turn in single phase motor?
If you really do mean the number of 'turns', then you cannot really determine this, as it is determined as a part of its design process and can vary considerably from machine to machine.If, on the other hand, you actually mean 'windings' ('coils') then, typically, there are two: the 'main winding' and the 'auxiliary winding'. The purpose of the auxiliary winding is to supply a magnetic field that is out of phase with the main winding and which then results in a rotating magnetic field necessary to start the motor and turn in in the desired direction.
Is it necessary to use three winding transformer or two winding one is enough when we have svc in the network?
maderchod
Why do you use a capacitor in fans?
Due to the type of motor used in a fan. The capacitor provides a phase shift between the stationary winding and the rotating winding, which is necessary to get the desired torque.
What is difference between main winding and auxiliary winding?
In the case of a capacitor-start/run single-phase induction motor, the main field is provided by the main (running) winding, and the capacitive branch is the auxiliary winding. In the case of a capacitor-start motor, the main winding is the running winding and the auxiliary winding is the starting winding.
If the running winding and the auxiliary winding were connected in series would the motor run?
no
Why must the auxiliary winding be different from the main winding in a split phase motor?
To differentiate it from the main winding and to make the path of the current different.
What is the number of turn in single phase motor?
If you really do mean the number of 'turns', then you cannot really determine this, as it is determined as a part of its design process and can vary considerably from machine to machine.If, on the other hand, you actually mean 'windings' ('coils') then, typically, there are two: the 'main winding' and the 'auxiliary winding'. The purpose of the auxiliary winding is to supply a magnetic field that is out of phase with the main winding and which then results in a rotating magnetic field necessary to start the motor and turn in in the desired direction.
Is it necessary to use three winding transformer or two winding one is enough when we have svc in the network?
maderchod
How the capacitor create a phase difference in single phase induction motor?
The stator consists of the main winding and a starting winding (auxiliary). The starting winding is connected in parallel with the main winding and is placed physically at right angles to it. A 90-degree electrical phase difference between the two windings is obtained by connecting the auxiliary winding in series with a capacitor and starting switch. When the motor is first energized, the starting switch is closed. This places the capacitor in series with the auxiliary winding. The capacitor is of such value that the auxiliary circuit is effectively a resistive-capacitive circuit (referred to as capacitive reactance and expressed as XC). In this circuit the current leads the line voltage by about 45° (because XC about equals R). The main winding has enough resistance-inductance (referred to as inductive reactance and expressed as XL) to cause the current to lag the line voltage by about 45° (because XL about equals R). The currents in each winding are therefore 90° out of phase - so are the magnetic fields that are generated. The effect is that the two windings act like a two-phase stator and produce the rotating field required to start the motor. When nearly full speed is obtained, a centrifugal device (the starting switch) cuts out the starting winding. The motor then runs as a plain single-phase induction motor. Since the auxiliary winding is only a light winding, the motor does not develop sufficient torque to start heavy loads. Split-phase motors, therefore, come only in small sizes. Type your answer here...
Why in transformer core is necessary?
A transformer core is a low-reluctance magnetic circuit, which ensures that most of the magnetic flux generated by the primary winding links with the secondary winding. Without a core, little of the magnetic flux generated by the primary winding will link with the secondary winding.
Why do you use a capacitor in fans?
Due to the type of motor used in a fan. The capacitor provides a phase shift between the stationary winding and the rotating winding, which is necessary to get the desired torque.
Why is a capacitor connected in series with starter winding?
In single phase motors, there are two windings. 1)Main winding 2) starter (auxiliary) winding. As per the double revolving theory in 1 phase machines, motor can rotate if current in the starter winding have near to 90 deg. phase shift wrt main winding. Now current flowing through capacitor leads by 90 deg. Ideally. So this is how we can get two currents which are having phase shift wrt each other. And the machine can rotate.
Why armature winding resistance is less than field winding resistance?
An 'armature winding' is the rotor winding, and the 'field winding' is the stator winding.
What does a capacitor on fan motors or blowers?
It is called a 'starter capacitor" and is used to provide a phase shift on the starter winding to get the motor turning in the right direction when first turned on. Once the motor is running a switch opens the starter circuit through the capacitor and starting winding, as this is no longer needed for the main motor windings to keep the motor turning.
What is LV winding of a transformer?
For a step-down transformer, its secondary winding will be the LV winding. For a step-up transformer, its primary winding will be its LV winding.
