0
Why when you turn on the hot water in the shower no water comes out at all the cold works fine but there is no water or pressure on the hot side?
Wiki User
∙ 15y ago
This is probably a pressure imbalance problem or you have air in the lines.
see the related video link provided.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do single phase motor self starting?
it have a water container. the water pressure in the container varies the self starter works.
How do you increase water pressure in a new shower head that that has literally no pressure when the old shower head worked very well?
Lets face the facts! In order to get as close as possible to the water pressure that is inside your pipes, you need to eliminate all barriers inside your shower head that block the flow. It's just plain physics! Don't be fooled by alot of mumbo jumbo that try to convince you that there is any other way to get high pressure from a shower head. The inside inner diameter of your water pipes is approximately 5/8th inch (15.88mm). To modify your showerhead to provide you that maximum pressure, you need to take your showerhead apart and do 2 things. First, you bore through the ball joint, which is that section that screws into your showerarm and ends in a round ball shape at one end, until you reach the same inner diameter that is in your pipes (see above). Then second, you look inside the body of the shower head to see if there are any other parts that may restrict the water flow in any way and remove those obstacles. Once you have accomplished these two steps, you reassemble your shower head and screw it into your showerarm without using any rubber seal since it would not have any seating inside your modified balljoint to avoid it from being pushed deep by the water pressure and clogging your shower head. You must instead apply 2 to three turns of Teflon tape around the threads of your showerarm and then just hand tighten your modified shower head on to your showerarm. It's not an easy task and most everyone decides that it is easier to just buy the only modified shower head that is bored to the above specs and really works. I have tested the ShowerBlaster brand shower head sold by Products That Work! with all the rest being sold as "modified" or "high pressure" shower heads, and there is a huge difference. The Shower Blaster shower head is the only modified high pressure shower head that is modified to the specs mentioned above. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -ANS 2 - Doing any of the above is tedious, possibly dangerous and unnecessary AND ALSO voids your warranty !Most showerheads sold in north America have quite good flow. If i was you, I'd take back this one that is not so good and exchange it for a better brand. I install showerheads of many major brands and all work well. Moen are my favorite but many other are good too.
How does a pressure to current converter works?
An electrical circuit is an example of an electrical pressure to electrical current convertor.
Where is the inlet and outlet of your pressure tank?
A pressure tank for a pump & well potable water system only has one connection. To connect the pump and tank to your house's water inlet, simply connect the tank and pump together with pressure rated pipe, SCH 40 PVC works fine. In that line, cut in a TEE fitting, and from that T, connect the house inlet with a valve to shut the water off.
How do you check if reducing valve works?
The easiest way is to install two pressure gauges (If reducing pressure) either side of the reducing valve, you will then have indication of upstream pressure and down stream pressure, of which you can adjust to suit you process.
How do you take a shower without using water?
Usually acid works the best for me
How does a automatic pet waterer work?
If it is separate from a water source, it works on gravity and pressure(water pressure). If it is hooked to a water source it works on a float system.
How do you clean a glass shower door?
I tried to use some soap water to clean the glass shower door. It works well.
How do rushmg wayer works?
The rushing water basically works on the pressure.
How does water pressure work?
Water pressure works based on the difference of altitudes or height. The height of the tank determines the amount of pressure that the water supply will have.
What is reduced when shower filter heads eliminate chlorine?
Also, Chlorine dries out your skin and your hair. Your skin absorbs the chlorine during your shower just like you're drinking it. That's why it's very important to pick a filtered shower head that works and preserves water pressure! like SparkPod filtered shower head.
Whats the best material for a shower bath curtain?
Material such as plastic works well as a shower curtain because it keeps all the water in the shower without soaking anything up. You also want to make sure it is plenty long to keep the water in.
Adjusting HotCold water with a new single shower handle?
First off - be on the outside of the shower and screw with it clockwise and anticlockwise and see what happens. Works every time.
Does just hot water clean the body in the shower?
Yes however a lile soap works even better.
How does an electric shower heat up so fast?
Electric showers only take water from the mains cold water supply. They heat the water when you turn the shower on, by passing it over a heating element inside the shower - in a similar way to how a kettle works. When you shower, you don't use up and stored hot water - so electric showers are ideal for families and households where there is a limited supply of hot water. Electric showers are always ready to use, any time of the day or night
Have used The works in your shower and the blue stained your shower how do you get the blue out?
I have the same issue :( Any luck?
How a led shower head works?
There is a small turbine inside shower head which runs a small generator which turns LEDs on while water is running. Some has a temperature sensitive circuit which switch colors of LEDs.
