evaporation or the removal of water.
A pool filter is there to remove particles of foreign matter from the pools water. Without a filter to remove this material it would not take long for the pools water to become cloudy and dangerous to the health of the swimmers.
From the pool
The best way would be to unplug the swimming pool filter, open the drain valve on your pool filter turn the pump back on and drop the water level to the desired level about 2 inches above the skimmer.
First of I think you may be referring to the pool filter not the pump. "Filter" runs the water thru the filter thus filtering the water. Recirculate, I believe, bypasses the filter media and sends the water back to the pool unfiltered. K
A pool skimmer is generally built into the side of or around the top of a swimming pool in order to skim debris from the surface of the water. A pool filter is built into the plumbing in order to filter fine debris from the water itself.
form_title=Pool Filter form_header=Pool service professionals are available to help you with all of your pool filtration needs. Are you having problems with the filtration system of your pool?*= () Yes () No Do you need a pool filter installed?*= () Yes () No Is your pool above ground or in ground?*= () Above ground () In ground Is your pool a chlorine or salt water pool?*= () Chlorine () Salt water
Keep your pool water clean is a very challenging task. You can use some pool supplies like Dust Net, Water filter, water vacuum cleaner for remove dust from surface, etc. Keep switch on your water filter for 24/7 hrs for cleaning water or remove small dust particles from the water. Clean your water filter after every 7 days it makes clear passage through the filter, it helps your water clean regularly. If you do not clean your filter then your filter get chocked up and water will not pass through the filter. You can chlorinate you pool water it also help to keep your pool water germs free.
Pool filters keep the water circulating and algae out of pools. So, any size pool you pick that you want to remain bacteria free would need a filter. Usually a pool that is put up for long term use would need a filter.
Salt is not a filter, it is added to pool water to allow a chlorine generator to operate.
Don't possibly know why you could be loosing pressure on the pool. However you may be loosing pressure in the line to the pool from the filter. If you are also loosing suction then : there is not enough water in the pool and the skimmer is sicking air. bad pump seal loose pump lid bad o-ring seal at pump lid loose fittings in and out of the pump. that is the piece of equip. that has the motor attached. The filter is the large tank. The pool is the vessel that is holding all the water. You can also lose pressure if your skimmer and your pump baskets are filled with debris, kink in the hoses, or your filter needs to be cleaned, or filter sand or cartridge needs replaced. You also may be thinking of pressure as in the force of the water coming out of the return jets. If this is the case, then your filter has become dirty and the water can't pass thru it very well. Clean your filter.
It lets the water BACK into the pool after it's been "filtered" through the filter.
Maybe there are particulates in the water, indicating that the filter needs maintenance.