YOU NEED REALLY BIG BATTERIES
how to program my tv with the RCA D 770 - universal remote control which has no code search button
Hold the button you want to program and then hold the on/off button at the same time it should program
To program a GPT universal remote control, hold down the power button at the same time with the button for the device that is going to be programmed. When the other buttons on the remote blink, let up and press on the power button again. The device should turn on. If not, repeat the process.
You can program your GE universal remote, to your converter box, by holding the power button in until the auxiliary read lights aluminate red. Select auxiliary and input the proper code.
Universal Edit Button was created on 2008-06-19.
there is no cable button on this remote what do i push to hook cable its says hit cable button
1. Turn on tv 2. Press and hold the setup button until red light stays on then release the setup button 3. Press the the desired mode button. ( tv, VCR ect.) 4. Press the channel UP button repeatedly till channel changes. (may take up to 300X 5. Press the mute button.
Make sure the device is on. Hold down the tv (or whichever device your trying to program) button first and then the power button simultaneously until the red light stays on solid. Then press the power button, it will flash one time, and keep pressing slowly letting it flash until the device turns off. Then press the stop button...and it is programmed.
http://downloads.devicemanuals.com/dl/rca/RCR311B.pdf
There is no Select button on an XBOX 360 controller. There is a "Start" button, a middle home button (The large "X") and a "Back button".
Press the button of what you want to program (cable,tv,or aux). Hold the set up button until your button of choice flashes twice. Enter your code (I had to enter a additional 1 to the beginning of my code). The button of choice should then flash once and it is now ready. I used this on a maxent 50' monitor
PROGRAM A TRISONIC UNIVERSAL REOMTE TS-rc 411