Word has it on the street that on a MB ML 320 you need to pull the radio and get the serial number. Submit it to the dealership with vin number and quala!you get the code.
I personally think there is another way without pulling the unit like if it's the original unit in the vehicle , they have the serial number on record and quala!you get the code.
anyone else have a response????????
If the battery is not taking a charge it is bad and needs to be replaced.
I disagree. I was having issues with my heater taking a long time to heat up. I had to have my battery replaced and my heater functioned normally after that.
depends on what type of car old hondas had a pop out in the trunk
Yes. You can either hook directly to the battery in the trunk, or you can hook the charger to the jump start posts under the hood.
there are many components on the system board that can be replaced without taking it to the manufacturer, it depends on youe expertise on hardwares, ranging from replacement of the processor to RAM, etc
Unfortunately, you have to remove the wheel to access the battery.
You can't. The wheel/tire must be removed in order to remove the battery. Click the link.
You may be able to clear it by disconnecting and reconnecting the battery. However, this may cause other problems. Another option is to go to a car parts dealer (i.e. Schuck's) and ask them to reset it.
is being a doctor the only option after taking biology in class11
You put the battery back in and you charge it
No
one is most places test for free. but the easy at home way to check is get your car jump started if its not starting on its own. after its running, pull the negative off the battery taking special car not to arc your wrench on anything. if its keeps running, alternator is good. if it dies, get it replaced. if the alternator is bad, it may have killed the battery, so get it tested and replaced if needed.