Unforuntetly your grears are stripped or no longer aligned. You need to either replace them or bend the metal piece holding the gears back straight so the gears are aligned
behind the window crank handle, there is a horseshoe shaped pin, pop that pin off and the crank handle should pull right off.
behind the window crank handle, there is a horseshoe shaped pin, pop that pin off and the crank handle should pull right off.
You probably need to repair the door handle and the lock
You have to take the inside handle apart to activate the latch manually. If you can't do it from the handle area you have to remove the inside door panel.
Need to know if it is an inside or outside door handle.
It is what they call a "scissor" jack. It comes with a handle that also doubles as a lug wrench.
You can replace the inside drivers door handle by removing the door panel. With the door panel removed the door handle mechanism will be visible. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
Probably not. Since snoop doggy dog is from earth, he probably can't handle the different conditions on Saturn.
pry up the cover from the outside of the handle and remove the 7 mm screws front and back
if rear side door; unlock and pull handle. if boot lid; pull handle in drivers side door-well (side of the drivers seat) "door open"
You will need to remove the inside door panel. Remove the door handle retaining screws. Remove the linkage from the back of the door handle.
with a screwdriver