You need to have the car checked for trouble codes. There are about 10 pages of things that could turn those lights on.
Warning lights come on when there is a problem. An Engine management light comes on when there is a problem within the engine, that may cause problems later.
The old fuse is for interior lights and radio memory. It does not feed engine management. There should be nothing to reset.
You need to check your engine. The computer has detected a problem with the engine management system and the light is letting you know that is has error codes stored.
The Vectra warning light is called the engine management warning light. It tells you that you need to get your Vectra checked by a mechanic.
Coil packs are known to failiure on these that would be my first line of investigation.
Check the wire which supplies energy for tail lights (the junction between the trunk and the car body). If it's broken it will cause the check engine come on.
i have three dashboard lights on in my vauxhall vectra showing a engine light a spanner and a skid light its also driving slow
depends which lights you mean there is a immobilizer light a injector light a glowplug light a engine management light a airbag light abs light reply with which light and I'll explain it for you
Police should not speed if there not chasing anyone or if there lights are not on or there sirens are not on
Yes. There are sensors in front of and behind the catalytic convertor that relay information to the engine computer which in turn adjusts fuel flow, timing adjustments and airflow. If there is a problem the computer cannot correct for it will cause the engine warning system to engage.
There are numerous warning lights for a Mazda RX8. Some of the warning lights are for engine oil, charging system, ABS, and check engine.
A bad relay switch could be the culprit if dash lights remain on after engine starts in a Toyota. Cold weather can also cause these lights to stay on after the engine starts.