SOLUTION: Ok... I HAD the same problem... Direct TV Remote wouldn't work with Olevia TV despite ANY codes that Direct TV or anybody replying to solution forums say they are. I… DID find a solution though! Use the Remote's Code search function, BUT SKIP the first code that turns off the TV... CONTINUE to press the Channel + button after manually turning the TV back on after the first successful code that turns off the TV. This is the ONLY solution that I have found that works and I haven't seen it posted on any solution site. TRY IT.. BET IT WORKS FOR YOU AS WELL! (If not, skip the 2nd code as well... Olevia HAD to have copied a major brand-name's remote code scheme because all the generic TV manufacturers end up copying a known companies' setup... but a LOT of them neglect to tell you which brand they copied... I have owned many generic TV's that I couldn't get codes for for many remotes through the past 35 years... and this has been the case on ALL OF THEM!) Keep this in mind when you think you can't get a remote to control basic functionality with ANY TV and ANY remote. (MORE)
Select menu, click on system setup, select 'remote', select 'program remote', select 'tv', select your type of TV. Slide the top slider on your remote to 'TV', press and hold …the yellow select button and the mute button until the light above TV on the remote flashes twice, enter the first remote code on the screen and then press power to see if the tv shuts off. If the TV does not shut off repeat for the other codes on the screen. (MORE)
Most remotecontrols come with codes for TVs, DVDs and cable boxes. You canalso check the remote control manufactures web page. I find it isbetter to just buy a universal remot…e control, that way I canprogram multiple devices on one remote control. (MORE)
Such codes are generated by the universal remote manufacturer rather than the TV manufacturer. As such, the actual codes will differ from one remote to another. Regretfully, O…levia TV's (for the most part) use proprietary infrared frequencies. This means that the code for another TV brand will not work with Olevia TV's..
If you are looking for a universal remote, Olevia made a learning remote (model RC-LRN). Amergence Technology Inc. sells them for 39.99. They can be reached at 866-965-3842. (MORE)
on dtv remote slide switch to tv press and hold mute and select until light flashes twice ,press 9 9 1 then 1 again ,press power button under slider then press channel button …up one at a time until tv turns off, then press select,, if u think u passed the code(tv turned off while programming, but now does not turn on)you can repeat process, when you get to the channel up part just press down instead. yea boy, i got ur back (MORE)
If you are a DirecTV or Cox subscriber, you may sync a universal remote to your television using code 1548 or 11548. These codes are for use with the following Coby televis…ion models: TFTV1022, TFTV1212, TFTV1513, TFTV1514, TFTV1524, TFTV1913, TFTV1923, TFTV2214, TFTV2224, TFTV2617, TFTV3217, TFTV3717, TFTV4717 If the codes do not work, or if you are not a DirecTV or Cox customer, the universal remote control manufacturer is responsible for creating and embedding a Coby-compatible code in the remote control. Please contact your cable carrier or the universal remote control manufacturer for assistance..
I had the same problem with my proscan 40lc45s and the remote from comcast. I called proscan at 888-977-6722. They were very helpful..
Codes 10178, 10029, 10030 and 10019 all… worked..
Hope this helps (MORE)
You are out of luck. Both Directt and Dish 's remote control have a very limited amount of programmable codes for "off-brands" of TVs. Especially those that are TV/DVD combos.… You best bet is to but another multifunction remote that will control both the tv/dvd combo AND the satellite receiver. Of course, make sure you check the back of the package for compatability before you purchase the new multifunction remote. That is one of the down sides to buying a less expensive brand of TV. I once installed a sat system on a TONKA tv......yes, I'm serious. The TV said TONKA on the front of it. That poor guy will NEVER find a remote that works for him. Good luck (MORE)
Myrio Remote Setup 1. Press a device key once. 2. Press and hold SETUP until the red LED blinks twice, then release. 3. Enter 9 9 1 , then the device group number (see tab…le below). The LED blinks twice. 4. Aim the remote at the device and press Power . The remote sends IR codes from its library to the selected device, starting with the most popular code first. If the device responds, go to step 6. 5. If the device does not respond, press CH+ . The remote will try the next code. Continue until the device responds. Note: Press CH- to try the previous code. 6. To set the code, press SETUP once. The LED blinks twice. 7. To search for other device codes, repeat steps 1 to 6. (MORE)
Try 10047. Worked for me the fist time. I've read elsewhere that Logitech Harmony universal remotes will work using RCA codes, they suggested L32HD31 as your TV to get it to… control the TCL tv and comcast. I have used 10047 and 11781 as the remote code for a TCL LCD TV on my Comcast digital adapter remote. They are each RCACodes, that work perfectly on TCL , as RCA is owned by TCL. Read more: http://wiki.answers.com/Q/How_can_you_find_the_remote_code_for_TCL_lcd_tv_for_your_comcast_digital_converter_box#ixzz1fuxrFuS1 . (MORE)
Directv has universal codes for most TV's that don't have codes. Use the link below to program your Directv remote, if they don't have the code for your model TV then make sur…e to let customer service know and they will give you a universal code and instructions to use with your T.V. It took me all day to find that out! Don't laugh, there's lots of us out there. I know, I probably talked to most of them. (MORE)
I went through a ton of codes,none worked.Then I tried another code,11531.This worked an a comcast digital adaptor remote,on a coby TF-TV 1913 or For my Coby LEDTV3226 t…he code 11265 worked for me. (MORE)
We don't have TV codes for the Soyo TV yet but I have provided instructions on how to perform a power scan with the DISH remote to locate a code that could possibly work your …Soyo TV. Remote: Basic Remote (Television Only) .
Turn the Television On. .
Press and hold the clear TV button for three seconds until the LED flashes. .
Press and release the Red TV Power button. .
Press and release the Up Arrow on the remote once every second until the television turns off. .
After the television turns off, press and release the # button on the remote. .
The TV mode button will flash 3 times. .
Test functionality with the TV. .
Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television. (MORE)
There are many codes available for an RCA tv. The main codes that work are 805, 627, 725, 503, 003, 641, 630, 830, 619, and 742. The related link below will allow you get addi…tional codes if needed! (MORE)