| Career | |
|---|---|
| Name: | Atlantis PQ |
| Owner: | BP plc |
| Operator: | BP plc (56%) BHP Billiton (44%) |
| Port of registry: | |
| Builder: | Daewoo Shipbuilding & Marine Engineering Okpo, South Korea |
| Laid down: | 21 June 2004 |
| Launched: | 17 August 2007 |
| Acquired: | 17 August 2007 |
| Maiden voyage: | August 2006 |
| In service: | First Oil October 2007 |
| Identification: | ABS class no: 07113220 Call sign: WPYW299 IMO number: 9265768 |
| Status: | Operational at 27°11′43″N 90°01′37″W / 27.195278°N 90.026944°WCoordinates: 27°11′43″N 90°01′37″W / 27.195278°N 90.026944°W |
| Notes: | [1] |
| General characteristics | |
| Class and type: | ABS: A1, floating offshore installation |
| Tonnage: | 30,882 metric tons |
| Displacement: | 88,826 metric tons |
| Length: | 129.07 m (423.5 ft) |
| Beam: | 116.1 m (381 ft) |
| Draught: | 26 m (85 ft) |
| Depth: | 52 m (171 ft) |
| Capacity: | Diesel oil: 48.3 m3 (1,710 cu ft) Freshwater: 12.6 m3 (440 cu ft) Fuel oil: 2,046.2 m3 (72,260 cu ft) Ballast tank: 38,219 m3 (1,349,700 cu ft) Other: 377.9 m3 (13,350 cu ft) |
| Crew: | 60 berths |
| Notes: | [1] |
Atlantis PQ is a BP plc and BHP Billiton joint venture semi-submersible oil platform on permanent location over the Green Canyon Atlantis Oil Field in deepwater Gulf of Mexico, 190 mi (310 km) south of New Orleans. The "PQ" identifies the platform as being a production facility with crew quarters.[2]
The vessel's hull was built by Daewoo Shipbuilding & Marine Engineering (DSME) in Okpo, South Korea. Its topsides modules were built in Morgan City, Louisiana with hull integration in Ingleside, Texas.[3]
Operating in depths of more than 2,100 metres (6,900 ft), Atlantis was the deepest moored semi-submersible platform in the world when it was installed. Independence Hub subsequently set a new record with its installation in 2,400 metres (7,900 ft) water depth.[citation needed]
|
Contents
|
As a result of the 2010 explosion of the semi-submersible Deepwater Horizon drilling rig and the subsequent oil spill, informants within BP came forward with allegations that safety practices at Atlantis PQ were flawed. Specifically, allegations have been laid against the plans and specs used in its construction, maintenance, and operation. Kenneth Abbott, a former BP contractor, reported that up to 80 percent of the engineering plans used to build and operate the installations were never authenticated by even BP engineers for safety and stability, and that over 80 percent of the plans for the underwater welds were never verified. Food & Water Watch, a US-based consumer interest group, filed a complaint with the US district court requesting an injunction to stop production on Atlantis PQ until these matters have been investigated.[4][5]
|
|||||||||||||||||||||||||||
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)