Results for: Automatic-number-announcement-circuit

Maximum number of E1 circuits on a DS3 circuit?

There is no direct mapping of E1 to DS3. The only way to connect the two is using an MPLS network. A DS3 is 45Mbps. An E1 is 2Mbps. The bandwidth of 22.5 E1's can traverse a D (MORE)

What is a free wheeling diode how is it connected in an automatic voltage regulator circuit?

Inductive load will accumulate stored energy. If an attempt is made to open the switch this energy will arc across the contacts of the switch, and could cause damage to the ci (MORE)

How does the number of cells affect the current in a circuit?

More cells = more available power. Power = voltage * current. The orientation of the cells determines whether this power is delivered as more voltage, or more current. If the (MORE)

Number of GFCI outlets you can have on one circuit?

In any one circuit from a single breaker, you can have up to twelve outlets. You can protect them ALL from ground faults by using ONE GFI outlet. Install it as the "first" out (MORE)
In Banking

What circuits would be the best for the automatic teller machine?

suppose you work for a bank and are leasing a frame relay connection to link an automatic teller machine located in a rural grocery store with you bank's headquarters. which o (MORE)

What is Short circuit maintenance current transformer in automatic voltage regulator?

the SCT is used to provide excitation during short circuit conditions. under Short Circuit the voltage may drop below threshold level causing field current to drop, to avoid o (MORE)

What is the answer to 20c plus 5 equals 5c plus 65?

20c + 5 = 5c + 65 Divide through by 5: 4c + 1 = c + 13 Subtract c from both sides: 3c + 1 = 13 Subtract 1 from both sides: 3c = 12 Divide both sides by 3: c = 4
Thanks for the feedback!

How do you get Excel to automatically display a number as currency?

You format the cells to currency and then when numbers are put into them, they will automatically display as currency. to format a selected range of cells in Excel, press the (MORE)