A braze-on is name for any number of parts of a bicycle which have been permanently attached to the frame.[1] The term "braze-on" comes from when these parts would have been brazed on to steel frame bicycles. Braze-ons continue to be so called even though they may be welded, glued, riveted, or moulded into the frame material, depending on the material itself and the connection method used elsewhere on the frame.
Uses
Braze-ons include:
- Rack and fender mounts at the dropouts, seatstays, and fork blades.
- Water bottle cage mounts.
- Cable carriers, guides, and stops.
- Pump pegs.
- Shifter bosses.
- Cantilever brake bosses.
- Chain hanger, inside the drive-side seatstay.
- Front derailleur hanger.
- Hub brake reaction arm mount. Called a Pacman braze-on if formed with a slot instead of a hole.[2]
References
- ^ Brown, Sheldon. "Sheldon Brown's Bicycle Glossary: Braze-on". Sheldon Brown. http://www.sheldonbrown.com/gloss_bo-z.html#brazeon. Retrieved on 2007-10-01.
- ^ "Sheldon Brown's Glossary: Pacman Braze-on". http://www.sheldonbrown.com/gloss_p.html. Retrieved on 2008-08-12.
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
