chloramine

Chloramine
Other names	Monochloramine Chloramide
Identifiers
CAS number	10599-90-3 Y
PubChem	25423
SMILES	ClN
InChI	1/ClH2N/c1-2/h2H2
InChI key	QDHHCQZDFGDHMP-UHFFFAOYAS
ChemSpider ID	23735
Properties
Molecular formula	NH2Cl
Molar mass	51.48 g/mol
Appearance	colorless
Melting point	−66 °C
Solubility in other solvents	Soluble
Related compounds
Related compounds	Dichloramine Nitrogen trichloride
Y (what is this?)  (verify) Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa)
Infobox references

Chloramine (monochloramine) is a chemical compound with the formula NH₂Cl. It is usually used as a dilute solution where it is used as a disinfectant. The term chloramine also refers to a family of organic compounds with the formulas R₂NCl and RNCl₂ (R is an organic group). Dichloramine, NHCl₂, and nitrogen trichloride, NCl₃, are also well known.

Synthesis and chemical reactions

NH₂Cl is a highly unstable compound in concentrated form, much less as a pure liquid. Pure NH₂Cl decomposes violently above −40 °C.^[1] NH₂Cl is, however, quite stable in dilute solution, and this considerable stability is the basis of its applications.

NH₂Cl is prepared by the chemical reaction between ammonia and hypochlorous acid^[2] under mildly alkaline conditions:

NH₃ + HOCl → NH₂Cl + H₂O

The synthesis is conducted in dilute solution. In this reaction HOCl undergoes attack by the nucleophile NH₃. At a lower pH, further chlorination occurs.

The above syntheses are useful but do not deliver NH₂Cl in pure form. The pure compound can be prepared by contacting fluoroamine with calcium chloride:

NH₂F + CaCl₂ → NH₂Cl + CaClF

NH₂Cl is a key intermediate in the traditional synthesis of hydrazine.

Monochloramine oxidizes sulfhydryls and disulfides in the same manner as HClO,^[3] but only possesses 0.4% of the biocidal effect of HClO.^[4]

Uses in water treatment

NH₂Cl is commonly used in low concentrations as a disinfectant in municipal water systems as an alternative to chlorination. This application is increasing. Chlorine (sometimes referred to as free chlorine) is being displaced by chloramine, which is much more stable and does not dissipate from the water before it reaches consumers. NH₂Cl also has a lower, however still present, tendency to convert organic materials into chlorocarbons such as chloroform and carbon tetrachloride. Such compounds have been identified as carcinogens and in 1979 the United States Environmental Protection Agency‎ began regulating their levels in U.S. drinking water. Furthermore, water treated with chloramine lacks the distinct chlorine odour of the gaseous treatment and so has improved taste.

However, as whole, chloramine results in a greater and more genotoxic number of disinfection by-products than chlorination.^[5]

Chloramine in tap water gives a greenish cast to the water in bulk, versus the normally bluish cast to pure water or water containing only free chlorine disinfectant. This greenish color may be observed by filling a white polyethylene bucket with chloraminated tap water and comparing it to chloramine-free water such as distilled water or a sample from a swimming pool.

New swimming pool initially filled with chloramine-treated tap water, showing greenish color of chloramine in bulk water. The color is less apparent in smaller volumes, but is noticeable in a white 5-gallon bucket, or even faintly detectable in a glass tumbler on careful inspection.

Chloramine can be removed from tap water by treatment with superchlorination (10 ppm or more of free chlorine, such as from a dose of sodium hypochlorite bleach or pool sanitizer) while maintaining a pH of about 7 (such as from a dose of hydrochloric acid). Hypochlorous acid from the free chlorine strips the ammonia from the chloramine, and the ammonia outgasses from the surface of the bulk water. This process takes about 24 hours for normal tap water concentrations of a few ppm of chloramine. Residual free chlorine can then be removed by exposure to bright sunlight for about 4 hours.

Situations where NH₂Cl should be removed

Aquarium owners must remove the chloramine from their tap water because it is toxic to fish. Aging the water for a few days removes chlorine but not the more stable chloramine, which can be neutralised using products available at pet stores.

Many animals are sensitive to chloramine and it must be removed from water given to many animals in zoos.

Chloramine must also be removed from the water prior to use in kidney dialysis machines, as it would come in contact with the bloodstream across a permeable membrane. However, since chloramine is neutralized by the digestive process, kidney dialysis patients can still safely drink chloramine-treated water.

Home brewers use reducing agents such as sodium metabisulfite or potassium metabisulfite to remove chloramine from brewing liquor as it, unlike chlorine, cannot be removed by boiling (A.J. DeLange). Residual sodium can cause off flavors in beer (See Brewing, Michael Lewis) so potassium metabisulfite is preferred.

Chloramine can be removed from bathwater and birthing tubs by adding 1000 mg of vitamin C per 75 gallons of water. Human-grade nutraceutical vitamin C reduces the pH of the water less than commercial tablets sold for this specific purpose.^{[citation needed]}

In swimming pools, chloramines are formed by the reaction of free chlorine with organic substances. Chloramines, compared to free chlorine, are both less effective as a sanitizer and more irritating to the eyes of swimmers. When swimmers complain of eye irritation from "too much chlorine" in a pool, the problem is typically a high level of chloramines.^{[citation needed]} Pool test kits designed for use by homeowners are sensitive to both free chlorine and chloramines, which can be misleading.^{[citation needed]}

Organic chloramines

A variety of organic chloramines are known and proven useful in organic synthesis. One example is N-chloromorpholine ClN(CH₂CH₂)₂O, N-chloropiperidine, and N-chloroquinuclidinium chloride.^[6]

Safety

NH₂Cl is toxic in large quantities. US EPA regulations limit chloramine concentration to 4 parts per million (ppm). A typical target level in US public water supplies is 3 ppm.

References

External links

• Chlorine and chloramines in the freshwater aquarium
• Chloramine FAQ from the San Francisco Public Utilities Commission
• "Chlorinated drinking water", IARC Monograph (1991)
• EPA Maximum Contaminant Levels
• WebBook page for NH2Cl