Share on Facebook Share on Twitter Email
Answers.com

Crossover cable

 

A network cable that crosses the transmit and receive lines. It is used to connect hubs and switches together using standard MDI-X ports, which are themselves crossover ports. The crossover cable crosses the lines first so that after the MDI-X crosses the lines, they are effectively back to a non-crossed condition.

The ports in modern hubs and switches automatically sense whether they are connecting to other hubs and switches rather than to computers and perform the crossover accordingly (see MDI port for more details). See also null modem cable.

Download Computer Desktop Encyclopedia to your iPhone/iTouch

Search unanswered questions...
Enter a question here...
Search: All sources Community Q&A Reference topics
Wikipedia: Crossover cable
Top

A crossover cable connects two devices of the same type, for example DTE-DTE or DCE-DCE, usually connected asymmetrically (DTE-DCE), by a modified cable called a crosslink. Such distinction of devices was introduced by IBM.

The crossing wires in a cable or in a connector adaptor allows:

  • connecting two devices directly, output of one to input of the other,
  • letting two terminal (DTE) devices communicate without an interconnecting hub knot, i.e. PCs,
  • linking two or more hubs, switches or routers (DCE) together, possibly to work as one wider device.

Examples

Other technologies

Some connection standards use different balanced pairs to transmit data, so crossover cables for them have different configurations to swap the transmit and receive pairs:

  • Twisted pair Token ring uses T568B pairs 1 and 3 (the same as T568A pairs 1 and 2), so a crossover cable to connect two Token Ring interfaces must swap these pairs, connecting pins 4, 5, 3, and 6 to 3, 6, 4, and 5 respectively.
  • A T1 cable uses T568B pairs 1 and 2, so to connect two T1 CSU/DSU devices back-to-back requires a crossover cable that swaps these pairs. Specifically, pins 1, 2, 4, and 5 are connected to 4, 5, 1, and 2 respectively.
  • A 56K DDS cable uses T568B pairs 02 and 04, so a crossover cable for these devices swaps those pairs (pins 01, 02, 07, and 08 are connected to 07, 08, 01, and 02 respectively).

See also



 
 

 

Copyrights:

Computer Desktop Encyclopedia. THIS COPYRIGHTED DEFINITION IS FOR PERSONAL USE ONLY.
All other reproduction is strictly prohibited without permission from the publisher.
© 1981-2009 Computer Language Company Inc.  All rights reserved.  Read more
Wikipedia. This article is licensed under the Creative Commons Attribution/Share-Alike License. It uses material from the Wikipedia article "Crossover cable" Read more