Ford MEL engine
| Ford MEL V8 | |
|---|---|
| Manufacturer | Ford Motor Company |
| Also called: | Marauder V8 |
| Production: | 1958–1967 |
| Predecessor: | Ford Y-block V8 Lincoln Y-block V8 |
| Successor: | Ford 385 V8 |
Ford developed the MEL ("Mercury-Edsel-Lincoln") engine series for use in
their line of
All MEL engines had wedge shaped combustion chambers formed between a flat head surface and an angle milled block deck, with the piston top determining the compression ratio and combustion chamber shape. Similar to the Chevrolet Big-Block 348 combustion chamber, also introduced in 1958, and the later 409. Unlike the Chevrolet, which had staggered valves and scalloped or M shaped valve covers, the MEL valves were inline with shaft mounted rocker arms like the FE model Ford engines which were introduced at the same time.
The MEL was similar to the Ford FE, with the same oiling system, bolt patterns, and valve stems, but was even larger. The main bearings were 2.9 in (74 mm), while the rod bearings were huge at 2.6 in (66 mm).
383
The 383 in³ (6.3 L) Marauder was the smallest member of the family. Produced from 1958 through 1960, it was only used in Mercury vehicles. It used a 4.3 in (109.2 mm) bore and 3.3 in (83.8 mm) stroke. Output began at 312 or 330 hp (233 or 246 kW), both with a four-barrel carburetor. 322 hp (240 kW) was the only output for 1959, and power dropped to 280 hp (209 kW) for the final year.
Applications:
- 1956–1957 Lincoln Continental
410
The least-common MEL engine was the 410 in³ (6.7 L) E-475. Bore was lower at 4.2 in (106.7 mm). 10.5.1 compression, a Holley four-barrel carb, and hydraulic lifters pushed out 475 ft.lbf (644 Nm) of torque. This engine was only used in the 1958, Edsel Corsair and Citation.
430
The 430 in³ (7.0 L) engine was produced from 1958 through 1965. It was also used in Ford Thunderbirds and was commonly referred to as the "Bulldozer" of the MEL series engines. The Super Marauder used three two-barrel carburetors. The 430 had a 4.30 in (109.2 mm) bore (same as the 383) and shared the 3.7 in (94 mm) stroke of the 410.
The 1958 Super Marauder was the first American production automobile engine to attain a 400 hp (298 kW) advertised rating.
The compression ratio started at 10.5:1 for 365, 375, and 400 hp (272, 280, and 298 kW), but was reduced to 10.0:1 in less than a year. These 1959 engines produced 345-350 hp (257 to 261 kW), but power was down to 315 hp (235 kW) for 1960.
New pistons and a four-barrel carburetor were added for 1963. 10.1:1 compression brought output back to 345 hp (257 kW).
Applications:
- 1958–1965 Lincoln Continental
- Ford Thunderbird
- 1958-1960 Mercury
462
The 430 was replaced by the 462 in³ (7.6 L) engine in 1966. Bore and stroke were entirely different at 4.38 in (111.3 mm) by 3.83 in (97.3 mm) and the 462 MEL engine produced 340 hp (254 kW) and as much as 485 ft·lbf (658 N·m) of torque. This engine was fitted with hydraulic lifters and a Carter AFB four-barrel carburetor. This large torquey engine was used only in Lincoln Continentals, from 1966 until mid-year in 1968 when it was replaced by the 385-series 460. Production ended after 1967. The production facilities in Lima were converted to produce the new Ford 385 engine family.
Applications:
- 1966–1968 Lincoln Continental
References
- Peter C Sessler (1999). Ultimate American V8 Engine Data Book. MotorBooks/MBI Publishing Company. ISBN 0-7603-0489-0.
- The Ford Mercury-Edsel-Lincoln. Retrieved on July 25, 2006.
See also
External links
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
