|
A hot shoe is a mounting point on the top of a camera to attach a flash unit.
Contents |
Design
The hot shoe is shaped somewhat like an inverted, squared-off "U" of metal. The matching adapter on the bottom of the flash unit slides in from the back of the camera and is sometimes secured by a clamping screw on the flash. In the center of the "U" is a metal contact point. This is used for standard, brand-independent flash synchronization. Normally the metal of the shoe and the metal of the contact are electrically isolated from each other. To fire the flash, these two pieces are shorted together. The flash unit sets up a circuit between shoe and contact—when it is completed by the camera, the flash fires.
In addition to the central contact point, many cameras have additional metal contacts within the "U" of the hot shoe. These are proprietary connectors that allow for more communication between the camera and a "dedicated flash". A dedicated flash can communicate information about its power rating to the camera, set camera settings automatically, transmit color temperature data about the emitted light, and can be commanded to light a focus-assist light or fire a lower-powered pre-flash for focus-assist, metering assist or red-eye effect reduction.
The physical dimensions of the "standard hot shoe" are defined by the International Organization for Standardization ISO 518:2006.[1]
History and use
Before the 1970s, many cameras had an "accessory shoe" or "cold shoe", intended to hold flashes that connected electronically via an outboard "PC cable" (not meaning a computer: the term goes back to the synchronization method of the "Prontor/Compur" shutters of the 1930s), or other accessories such as external light meters, special viewfinders, or rangefinders. These earlier accessory shoes were mostly the same U shape, and thus provided the template for the introduction of the hot shoe.
Canon, Nikon, Olympus, and Pentax use the standard ISO hot shoe with various proprietary electronic connections. Since 1988, Minolta has used a proprietary "iISO" connector, and Sony digital SLR cameras are based on Minolta designs and use the same connector.
References
- ^ "518:2006 - Photography - Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units - Specification". International Organization for Standardization. 12 May 2006. http://www.iso.org/iso/en/CatalogueDetailPage.CatalogueDetail?CSNUMBER=36330&scopelist=ISO. Retrieved 11 June 2008.
External links
 |
This design-related article is a stub. You can help Wikipedia by expanding it. |
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
