Motorcycle frame
Wikipedia on Answers.com:
Top
Motorcycle frame
A motorcycle frame includes the head tube that holds the front fork and allows it to pivot. Some motorcycles include the engine as a load-bearing, stressed member. The rear suspension is an integral component in the design. Traditionally frames have been steel, but titanium, aluminium, magnesium, and carbon-fibre, along with composites of these materials, have been used. Because of different motorcycles' varying needs of cost, complexity, weight distribution, stiffness, power output and speed, there is no single ideal frame design.[1]
|
Contents
|
Frame materials
Steel
- Examples
Aluminium
- Examples
Aluminium and carbon-fibre
- Examples
- Bimota SB8K (composed of two aluminium alloy beams and carbon fibre plates)
Carbon fibre
Titanium
- Examples
Magnesium
- Examples
Magnesium and aluminium
- Examples
Frame Types
Pressed frame
The frame is mass-produced by sheet metal pressed or stamped into shape. Typically a single-cradle structure is used.
- Examples
Single cradle
The motorcycle engine is held in a single cradle with a single spine.
Half-duplex cradle frame
The motorcycle engine is held in a double cradle with a single spine and single downtube.
- Examples
- Suzuki GSX250
- Suzuki TS50ER
Full duplex cradle frame
The motorcycle engine is held in a full by two separate cradles, normally with a single spine.
- Examples
Double cradle or perimeter frame
Two cradles follow the perimeter
- Examples
Spine or backbone frame
The motorcycle engine is suspended from a single spine.
- Examples
- Honda CB92 Benly
- Kawasaki Z1000
Frame of a 2011 Kawasaki ZX-10R.
Aluminum beam frame on Buell Lightning.
Beam
Twin beams join headstock to swingarm pivot in as straight and short a line as possible.
- Examples
Monocoque
Main article: Monocoque
Supports structural load using the external skin of the frame.
- Examples
- 1944 Piaggio MP5
- Honda NR500
- 2008 Kawasaki Ninja ZX-14
Trellis
Similar to the beam frame, connecting the steering head and swingarm pivot point directly as possible. The frame is made up of a large number of short steel (or aluminium) tubes welded together to form a trellis.
- Examples
- Most modern Ducatis
- Suzuki SV650
- Kawasaki Versys
- Honda VTR250
Engine as a stressed member
For rider comfort, a motorcycle's engine can be mounted on rubber bushings to isolate vibration from the rest of the machine. This strategy means the engine contributes little to frame stiffness, and absorbing rather than dissipating vibration can lead to stress damage to the frame, exhaust pipes, and other parts.[1]
Instead, if the engine is rigidly mounted to the frame, vibrations pass to and are dissipated via the whole frame, and the rider. Rigid mounting allows the engine to contribute to the overall stiffness of the frame. It also becomes possible to mount the swingarm directly to the engine rather than the frame, avoiding the need for frame members extending downward to the swingarm pivot. By increasing the number of mounting points between the engine and frame, vibrations and stress can be better dissipated in the frame, typically creating a triangle between the swingarm in the rear, the cylinder head at the top and the lower crankcase area at the front. If a rigidly mounted engine not only contributes to, but is critical to, the stiffness of the frame, and is an integral part of closing the triangle or trellis structure that transfers force from the headstock to the swingarm, to the point that without the engine the frame would be deformed, the engine is called a stressed member, or a lifted engine. Sharing the load between the engine and frame reduces the overall weight of the motorcycle.[1]
During early testing of the 1983 Kawasaki GPZ900R, twin downtubes were included, creating a full cradle, but the downtubes were found to carry little load, so they were removed, relying entirely on the combination of the steel backbone and engine for chassis rigidity.[4] BMW's R1100 series twins of 1994 relieved the frame of stress entirely, with the engine carrying the total load from the front Telever fork to the rear Monolever.[5][6]
See also
Notes
 |
Wikimedia Commons has media related to: Motorcycle frame |
- ^ a b c Cocco, Gaetano (2004), Motorcycle Design and Technology, Saint Paul, Minnesota: Motorbooks Workshop/MBI, pp. 119–132, ISBN 0-7603-1990-1, http://books.google.com/books?id=Ydk0bgq2_3YC&pg=PA119, retrieved 2011-02-26
- ^ "1971 Titanium Husqvarna; A bike as trick as they got", American Motorcyclist (Westerville, Ohio: American Motorcyclist Association) 60 (11): 75, November 2006, ISSN 0277-9358, http://books.google.com/books?id=tPUDAAAAMBAJ&pg=PA75, retrieved 2011-02-26
- ^ Cathcart, Alan (January 2008), "ELF Racing - ELF Motorcycle Chassis Designs - Retrospective;Tracing A Decade Of Radical Racebike Experimentation", Motorcyclist: 50(6), ISSN 0027-2205, http://motorcyclist.automotive.com/75816/122-0801-elf-racing-motorcycle-chassis-design/index.html, retrieved 2011-02-26
- ^ Walker, Mick (2006), Motorcycle: Evolution, Design, Passion, Johns Hopkins University Press, pp. 174–175, ISBN 0-8018-8530-2
- ^ Stermer, Bill (2006), Streetbikes: Everything You Need to Know, Saint Paul, Minnesota: Motorbooks Workshop/MBI, p. 155, ISBN 0-7603-2362-3, http://books.google.com/books?id=NMokiWY6E00C&pg=PA155, retrieved 2011-02-26
- ^ Coombs, Matthew; Shoemark, Pete (2002), Motorcycle Basics Techbook (2nd ed.), Haynes Manuals, p. 9.6, ISBN 978-1-85960-515-8
|
||||||||||||||||||||||||||||||||||||||||||||
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
Post a question - any question - to the WikiAnswers community:
Copyrights:
Wikipedia on Answers.com
This article is licensed under the Creative Commons Attribution/Share-Alike License. It uses material from the Wikipedia article Motorcycle frame.
Read more