(engineering) A measure of reliability of a piece of repairable equipment, giving the average time between repairs.
| Sci-Tech Dictionary: mean time to repair |
(engineering) A measure of reliability of a piece of repairable equipment, giving the average time between repairs.
| 5min Related Video: Mean time to recovery |
| Wikipedia: Mean time to recovery |
[1]==Disambiguation== This article discusses Mean Time To Recovery. For other uses, please see the following link:
"Mean Time To Restore" is currently mistakenly linked to this page although it may have a different meaning.
|
|
This article does not cite any references or sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (April 2008) |
Mean time to recovery (MTTR)[2][3] is the average time that a device will take to recover from any failure. Examples of such devices range from self-resetting fuses (where the MTTR would be very short, probably seconds), up to whole systems which have to be repaired or replaced.
The MTTR would usually be part of a maintenance contract, where the user would pay more for a system whose MTTR was 24 hours, than for one of, say, 7 days. This does not mean the supplier is guaranteeing to have the system up and running again within 24 hours (or 7 days) of being notified of the failure. It does mean the average repair time will tend towards 24 hours (or 7 days). A more useful maintenance contract measure is the maximum time to recovery which can be easily measured and the supplier held accountable.
Note that some suppliers will interpret MTTR to mean 'mean time to respond', and others will take it to mean 'mean time to replace/repair/recover/resolve'. The former indicates that the supplier will acknowledge a problem and initiate mitigation within a certain timeframe. Some systems may have an MTTR of zero, which means that they have redundant components which can take over the instant the primary one fails, see RAID for example. That said however, the failed device involved in this redundant configuration still needs to be returned to service and hence the device itself has a non-zero MTTR even if the system as a whole (through redundancy) has an MTTR of zero. But, as long as service is maintained, this is a minor issue.
This article was originally based on material from the Free On-line Dictionary of Computing, used with permission. Update as needed.
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
| MTTR | |
| Meantime | |
| Hot spare |
| Recovery time for endolymphatic shunt? Read answer... | |
| What is the recovery time for a broken metacarpal? Read answer... | |
| What is the Recovery time of the human ATPPC? Read answer... |
| What is the recovery time for septorhinoplasty? | |
| What is the Recovery time from endoscopy? | |
| Recovery time after fusion of L3-L4? |
Copyrights:
![]() | Sci-Tech Dictionary. McGraw-Hill Dictionary of Scientific and Technical Terms. Copyright © 2003, 1994, 1989, 1984, 1978, 1976, 1974 by McGraw-Hill Companies, Inc. All rights reserved. Read more | |
![]() | Wikipedia. This article is licensed under the Creative Commons Attribution/Share-Alike License. It uses material from the Wikipedia article "Mean time to recovery". Read more |