NACA duct

This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (November 2010)

Artist's concept picture of a submerged inlet for a jet aircraft

Three intakes on an engine cowling

Numerous ducts on the Ferrari F40

A NACA duct^[1] also sometimes called a NACA scoop or NACA Inlet, is a common form of low-drag air inlet design, originally developed by the U.S. National Advisory Committee for Aeronautics (NACA), the precursor to NASA, in 1945.

When properly implemented, a NACA duct allows air to flow into an internal duct, often for cooling purposes, with a minimal disturbance to the flow. The design was originally called a "submerged inlet", since it consists of a shallow ramp with curved walls recessed into the exposed surface of a streamlined body, such as an aircraft. It is especially favored in racing car design.

Prior submerged inlet experiments showed poor pressure recovery due to the slow-moving boundary layer entering the inlet. This design is believed to work because the combination of the gentle ramp angle and the curvature profile of the walls creates counter-rotating vortices which deflect the boundary layer away from the inlet and draws in the faster moving air, while avoiding the form drag and flow separation that can occur with protruding scoop designs. This type of flush inlet generally cannot achieve the larger ram pressures and flow volumes of an external design, and so is rarely used for the jet engine intake application for which it was originally designed, such as the North American YF-93 and Short SB.4 Sherpa. It is, however, common for piston engine and ventilation intakes.

See also

• NACA cowling

References

Further reading

• Staniforth. Race and Rally Car Sourcebook. ISBN 1-85960-846-9.  (Practical guidance on designing and building NACA ducts for motor-racing applications)

External links

• Abstract of NACA ACR 5I20 report and .pdf file
• Archive of NACA reports 1917-1958
• Warren Beauchamp (2000). "NACA Duct Rationale and Construction". http://www.recumbents.com/wisil/nacaduct/naca-duct.htm. "Practical experience of fabricating simple NACA ducts for ventilation of a HPV" 

This article about aircraft components is a stub. You can help Wikipedia by expanding it. v t e