Open end spinning

This article has multiple issues. Please help improve it or discuss these issues on the talk page. It may require cleanup to meet Wikipedia's quality standards. Tagged since September 2009. It may be too technical for most readers to understand. Please help make it understandable to non-experts. Tagged since March 2011. It may need to be wikified to meet Wikipedia's quality standards. Tagged since September 2009.

Open end spinning or open-end spinning is a technology for creating yarn without using a spindle. It was invented and developed in Czechoslovakia in Výzkumný ústav bavlnářský / Cotton Researching Institute in Ústí nad Orlicí in the year 1963. It is also known as break spinning or rotor spinning. The principle behind open end spinning is similar to that of a clothes dryer spinning full of sheets. If you could open the door and pull out a sheet, it would spin together as you pulled it out. Sliver from the card goes into the rotor, is spun into yarn and comes out, wrapped up on a bobbin, all ready to go to the next step. There is no roving stage or re-packaging on an auto-coner. This system is much less labour intensive and faster than ring spinning with rotor speeds up to 140,000rpm. The Rotor design is the key to the operation of the open-ended spinners. Each type of fiber may require a different rotor design for optimum product quality and processing speed.

The first open-end machines in the UK were placed, under great secrecy, by Courtaulds into Maple Mill, Oldham in 1967.

One disadvantage of open-end spinning is that it is limited to coarser counts, another is the structure of the yarn itself with fibers less in parallel compared to ring spun yarns for example, consequently cloth made from open-end yarn has a 'fuzzier' feel and poorer wear resistance.

History

The global demand for spun fibre is huge. Converting raw fibre to yarn is a complicated process. Many manufacturers compete to provide the spinning machines that are essential to meeting the demand by delivering increases in spinning productivity and additional improvements in yarn quality. Over the past three centuries spinning technology has been continuously improved through thousands of minor innovations, and occasional major advances that have collectively increased the quality and lowered the cost of producing yarn dramatically.

Major technology advances have included:

• Hand spinning,
• Mule spinning
• Ring spinning
• Rotor spinning
• Dref Friction Spinning
• Open-End spinning.

The number of manufacturers who can successfully compete has been reduced as the technical complexity of the spinning machines has increased. However, there are many competent companies serving the global market for spinning machines who continue to pursue innovative ways to increase spinning productivity and yarn quality.

Characteristics

A good Open-end machine should have,

• Higher productivity

Higher Productivity:- This is a major criteria as productivity reduces the cost of manufacturing. The O.E machines which are now in market boasts of many a basic needs like, longer length of machine, higher speeds, able to process coarser hank, fewer changes for Count, easy access to parts (less downtime for cleaning), longer production time between cleaning schedules, computerized controls for less power consumption and lower downtime and complete report generation giving leads to problem area are some points to discuss.

• high content sliver cans (up to 18”)

Large Sliver Can:- In early days large machines were equipped with less distance between Rotors (Gauge of machine). This led to creeling of very small cans, which required frequent can changes. Each can change requires a break in the yarn. All major manufacturers currently allow cans up to 18” diameter leading to less breakage, less joining of yarn, hence better quality and higher productivity. Originally round cans were used. Rectangular cans are used because they double sliver capacity in the same sliver can footprint.

• Larger packages of yarn (4 to 5 kg)

Large Final Package:- The final package size has continued to increase. The final package size is important because it reduces tube change frequency and thus reduces idle time for creeling. Current yarn packages typically weigh 4 to 5 kgs. The Savio Super Spinner 3000 currently has the largest package size at 6kgs.

• Less power consumption

Less Power Consumption:- Using individual motors and electronic controls for each of the various drives of the machine maximize energy efficiency and minimizes downtime.

• Automation

Automation:- All spinning machines, whether ring or open end, need yarn joining to repair breaks or start new sliver cans. Joining the yarn has historically been a labor intensive activity and a source of quality defects. Autopiecing units are robots that automate this process. Market leaders like Schlafhorst, Rieter, Savio have machines that incorporate good quality autopiecers and autodoffing. This automation leads to less material handling costs and helps improve quality of the final product.

• Flexibility of spinning components

Flexibility of spinning component:- Many vendors are offering machines that can be programmed to produce many different types of yarns. The ability to rapidly change production results in the flexibility to serve multiple markets. A contemporary spinning mill should be able to produce a range of products: denim, knitting, towels, structured fabrics, construction fabrics and various other products like core spun, multi count etc.

• Handling count range.

Handling count range:- Machines need to be easily programmed to spin yarns from 4sNe to 60sNe. This ability allows a single machine to produce yarns that cater to many different end user requirements.

References

Bibliography

v d e Spinning Materials Noil Rolag Roving Sliver Staple Top Tow Woolen Worsted Techniques Carding Combing Heckling Long draw Scutching Short draw Twist per inch Hand spinning tools Hand spinning Distaff Niddy noddy Spindle Spinning wheel Spinners weasel Industrial spinning Cotton-spinning machinery Ring spinning Open end spinning Dref Friction Spinning Magnetic ring spinning Mule spinners' cancer Spinning frame Spinning jenny Spinning mule Throstle frame Water frame Wool combing machine

v d e Lancashire cotton Architects Stott Sidney Stott (later Sir Philip) Edward Potts Potts, Pickup & Dixon F.W. Dixon & Son Engine makers Daniel Adamson Ashton Frost Ashworth & Parker Bateman & Sherratt Boulton & Watt Browett, Lindley & Co Buckley & Taylor Carel Earnshaw & Holt Goodfellow Fairbairn W & J Galloway & Sons B Goodfellow Hick, Hargreaves & Co Benjamin Hick and Sons John Musgrave & Sons J & W McNaught Petrie of Rochdale George Saxon Scott & Hodgson Urmson & Thompson Yates of Blackburn Yates & Thom Whilans J & E Wood Woolstenhulmes & Rye Machinery makers Brooks & Doxey Butterworth & Dickinson Curtis, Parr & Walton Dobson & Barlow John Hetherington & Sons Joseph Hibbert Howard & Bullough Geo. Hattersley Asa Lees Mather & Platt Parr, Curtis & Madely Platt Brothers Taylor, Lang & Co Textile Machinery Makers Ltd Tweedales & Smalley Ancillary firms Oldham Limiteds Fine Spinners and Doublers Lancashire Cotton Corporation Combined Egyptian Mills Ltd Courtaulds Bagley & Wright Industrial processes Textile manufacturing Cotton-spinning machinery Dref Friction Spinning Magnetic ring spinning Open end spinning Ring spinning Spinning frame Spinning jenny Spinning mule Water frame Roberts Loom Lancashire Loom Lists of mills LCC mills Bolton Bury Cheshire Derbyshire Lancashire Manchester Oldham Rochdale Salford Stockport Tameside Wigan Museums Helmshore Mills Queen Street Mill (Burnley) Weavers' Triangle (Burnley)