 |
This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (August 2008) |
A pentaprism is a five-sided reflecting prism used to deviate a beam of light by 90°. The beam reflects inside the prism twice,[1] allowing the transmission of an image through a right angle without inverting it (that is, without changing the image's handedness) as an ordinary right-angle prism or mirror would.
The reflections inside the prism are not caused by total internal reflection, since the beams are incident at an angle less than the critical angle, or minimum angle for total internal reflection. Instead, the two faces are coated to provide mirror surfaces. The two opposite transmitting faces are often coated with an antireflection coating to reduce spurious reflections. The fifth face of the prism is not used optically, but truncates what would otherwise be an awkward angle joining the two mirrored faces.
Contents |
Roof pentaprism
A variant of this prism is the roof pentaprism which is commonly used in the viewfinder of single-lens reflex cameras.[1] In this case, the image needs to be reflected left-to-right, as the prism transmits the image formed on the camera's focusing screen, which is itself reflected by the reflex mirror in the camera body. This reflection is done by replacing one of the reflective faces of a normal pentaprism with a "roof" section, with two additional surfaces angled towards each other and meeting at a 90° angle. This form of the prism changes the handedness of the image.
 A perspective drawing showing the more usual configuration of a roof pentaprism in a single lens reflex camera (SLR). The image is flipped laterally. |
 Nikon F with an interchangeable roof pentaprism — the world's first system camera |
 Contax S with the world's first roof pentaprism on a single-lens reflex camera |
 Prism housing for Bronica ETR medium format cameras. |
 A pentaprism projecting an image on a piece of paper. This is looking in through the eyepiece plane. |
Pentaprism in surveying
In surveying a double pentaprism (two pentaprisms stacked on top of each other) and a plumb-bob are used to stake out right angles, e.g. on a construction site.
See also
References
- ^ a b Norman Goldberg (1992). Camera Technology. Academic Press. ISBN 0122875702. http://books.google.com/books?id=x4334ns-3noC&pg=PA135&dq=roof+pentaprism&ei=skyySLT7L6POtAOl5ZXsBA&sig=ACfU3U0DsJYZGQeaYmqjd00E6U8dRxxhMg#PPA135,M1.
 |
This optics-related article is a stub. You can help Wikipedia by expanding it. |
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
