
n.
A clear colorless liquid, HClO4, explosively unstable under some conditions, that is a powerful oxidant used as a catalyst and in explosives.
| Dictionary: per·chlo·ric acid |

| 5min Related Video: perchloric acid |
| Chemistry Dictionary: chloric(VII) acid |
An unstable liquid acid, HClO4; r.d. 1.76; m.p. –112°C; b.p. 39°C (50 mmHg); explodes at about 90°C at atmospheric pressure. There is also a monohydrate (r.d. 1.88 (solid), 1.77 (liquid); m.p. 48°C; explodes at about 110°C) and a dihydrate (r.d. 1.65; m.p. –17.8°C; b.p. 200°C). Commercial chloric(VII) acid is a water azeotrope, which is 72.5% HClO4, boiling at 203°C. The anhydrous acid may be prepared by vacuum distillation of the concentrated acid in the presence of magnesium perchlorate as a dehydrating agent. Chloric(VII) acid is both a strong acid and a strong oxidizing agent. It is widely used to decompose organic materials prior to analysis, e.g. samples of animal or vegetable matter requiring heavy-metal analysis.
| Medical Dictionary: per·chlo·ric acid |
| WordNet: perchloric acid |
The noun has one meaning:
Meaning #1:
a powerful oxidizing agent; forms perchlorates
| Wikipedia: Perchloric acid |
| Perchloric acid | |
|---|---|
| Identifiers | |
| CAS number | 7601-90-3 |
| EC number | 231-512-4 |
| UN number | 1873 |
| RTECS number | SC7500000 |
| Properties | |
| Molecular formula | HClO4 |
| Molar mass | 100.46 g/mol |
| Appearance | colorless liquid |
| Density | 1.67 g/cm3 |
| Melting point | |
| Boiling point |
203 C (azeotrope)[3] |
| Solubility in water | miscible |
| Hazards | |
| MSDS | ICSC 1006 |
| EU Index | 017-006-00-4 |
| EU classification | Oxidant (O) Corrosive (C) |
| R-phrases | R5, R8, R35 |
| S-phrases | (S1/2), S23, S26, S36, S45 |
| NFPA 704 | |
| Related compounds | |
| Related compounds | Hydrochloric acid Hypochlorous acid Chlorous acid Chloric acid |
| Except where noted otherwise, data are given for materials in their standard state (at 25 °C, 100 kPa) |
|
| Infobox references | |
Perchloric acid, HClO4, is an oxoacid of chlorine and is a colorless liquid soluble in water. It is a strong acid comparable in strength to sulfuric and nitric acids. It is useful for preparing perchlorate salts, but it is also dangerously corrosive and readily forms explosive mixtures.
Contents |
Perchloric acid is produced by treatment of sodium perchlorate with sulfuric acid and by the electrochemical oxidation of aqueous chlorine.[4]
Perchloric acid is a superacid, and one of the strongest Brønsted-Lowry acids. Its pKa is −10.[5]
Anhydrous perchloric acid is an oily liquid. It forms a series of at least five hydrates, several of which have been characterized crystallographically. The dihydrate is representative: the solid consists of the perchlorate anion linked to H2O and H3O+ centers via hydrogen bonds.[6] Perchloric acid forms an azeotrope with water, consisting of about 72.5% perchloric acid. This form of the acid is stable indefinitely and is commercially available. Such solutions are hygroscopic, that is, if left unsealed, concentrated acid dilutes itself by absorbing water from the air.
The concentrated acid can be prepared by distillation of a solution of sodium perchlorate in concentrated sulfuric acid.
In a related method, barium perchlorate reacts with dilute sulfuric acid to precipitate barium sulfate, leaving perchloric acid. It also can be made by mixing nitric acid with ammonium perchlorate. The reaction gives nitrous oxide and perchloric acid due to a concurrent reaction involving the ammonium ion.
Anhydrous and monohydrated perchloric acid are explosive, but the usual aqueous solutions are stable in the absence of organic compounds. It is very corrosive to skin and eyes. Upon contact with perchloric acid, organic materials such as cloth and wood ignite. Salts of perchloric acid are also powerful oxidizers that can be explosive. Perchlorate salts tend to be more stable than their chlorate counterparts, which has led to their increased use in pyrotechnic compositions due to safety concerns.
Due to these hazards, perchloric acid is usually handled under fume hoods with wash-down and air scrubbing capabilities that are not available on standard laboratory fume hoods. The crystalline form of the acid, which is explosive and shock sensitive, can precipitate on hood surfaces; washing down the hood interior returns any crystalline form to solution, thus eliminating the explosion hazard.
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
| perchlorate | |
| peracid (chemistry) | |
| hyperoxymuriatic |
| How is bond formation between chloride-oxygen in perchloric acid in perchlorate? | |
| What is the chemical formula for perchlorate acid? | |
| Is sodium perchlorate an acid? |
Copyrights:
![]() | Dictionary. The American Heritage® Dictionary of the English Language, Fourth Edition Copyright © 2007, 2000 by Houghton Mifflin Company. Updated in 2009. Published by Houghton Mifflin Company. All rights reserved. Read more | |
![]() | Chemistry Dictionary. A Dictionary of Chemistry. Sixth Edition. Copyright © Market House Books Ltd, 2008. All rights reserved. Read more | |
![]() | Medical Dictionary. The American Heritage® Stedman's Medical Dictionary Copyright © 2002, 2001, 1995 by Houghton Mifflin Company. Read more | |
![]() | WordNet. WordNet 1.7.1 Copyright © 2001 by Princeton University. All rights reserved. Read more | |
![]() | Wikipedia. This article is licensed under the Creative Commons Attribution/Share-Alike License. It uses material from the Wikipedia article "Perchloric acid". Read more |
Mentioned in