| PFA | |
|---|---|
 |
|
| Density[1] | 2150 kg/m3 |
| Flexural modulus(E) | 586 MPa |
| Tensile strength(t) | 24 MPa |
| Elongation @ break | 300% |
| Folding endurance | No break |
| Notch test | |
| Melting point | 305 °C |
| Maximum operating | |
| temperature | 260 °C |
| Water absorption (ASTM) | <0.03 % after 24 hours |
| Dielectric constant (Dk) | |
| at 1MHz | 2.1 |
| Dissipation factor | |
| at 1MHz | 0.0001 |
| Arc resistance | < 180 seconds |
| Resistivity at 50% R.H. | > 1016 Ω m |
Perfluoroalkoxy, Teflon-PFA, or PFA is a type of fluoropolymer with properties similar to polytetrafluoroethylene (PTFE). It differs from the PTFE resins in that it is melt-processable using conventional injection molding and screw extrusion techniques.
PFA was invented by DuPont and is sold under the brandname Teflon-PFA. Teflon is better known as the trade name for a polymer with similar properties, PTFE. A similar product is available from Daikin using the brandname Neoflon-PFA or from Solvay Solexis using the brandname Hyflon-PFA.
PFA is very similar in composition to the fluoropolymers PTFE and FEP (fluorinated ethylene-propylene). PFA and FEP both share PTFE's useful properties of low coefficient of friction and non-reactivity, but are more easily formable. PFA is softer than PTFE and melts at 305 °C.
Another version of polytetrafluoroethylene perfluoro methylvinylether, with a different ratio of PTFE and MVE monomers from PFA, is MFA.
Notes
- ^ "PTFE, FEP, and PFA Specifications". Boedeker Corp. 2007. http://www.boedeker.com/feppfa_p.htm. Retrieved 2007-12-22.
 |
This article about polymer science is a stub. You can help Wikipedia by expanding it. |
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
