photovoltaic

Nellis Solar Power Plant at Nellis Air Force Base in the USA. These panels track the sun in one axis.

Photovoltaic SUDI shade is an autonomous and mobile station in France that replenishes energy for electric vehicles using solar energy.

Solar panels on the International Space Station

Photovoltaics (PV) is a method of generating electrical power by converting solar radiation into direct current electricity using semiconductors that exhibit the photovoltaic effect. Photovoltaic power generation employs solar panels composed of a number of solar cells containing a photovoltaic material. Materials presently used for photovoltaics include monocrystalline silicon, polycrystalline silicon, amorphous silicon, cadmium telluride, and copper indium gallium selenide/sulfide.^[1] Due to the growing demand for renewable energy sources, the manufacturing of solar cells and photovoltaic arrays has advanced considerably in recent years.^[2][3][4]

Solar photovoltaics is growing rapidly, albeit from a small base, to a total global capacity of 67 GW at the end of 2011, representing 0.5% of worldwide electricity demand.^[5] More than 100 countries use solar PV.^[6] Installations may be ground-mounted (and sometimes integrated with farming and grazing)^[7] or built into the roof or walls of a building (building-integrated photovoltaics).

Driven by advances in technology and increases in manufacturing scale and sophistication, the cost of photovoltaics has declined steadily since the first solar cells were manufactured ^[8] and the levelised cost of electricity (LCOE) from PV is competitive with conventional electricity sources in an expanding list of geographic regions.^[9] Net metering and financial incentives, such as preferential feed-in tariffs for solar-generated electricity, have supported solar PV installations in many countries.^[10]

Solar cells

Solar cells produce electricity directly from sunlight

Average solar irradiance, watts per square metre. Note that this is for a horizontal surface, whereas solar panels are normally mounted at an angle and receive more energy per unit area. The small black dots show the area of solar panels needed to generate all of the world's energy using 8% efficient photovoltaics.

Solar cell productions by region^[11]

Photovoltaics are best known as a method for generating electric power by using solar cells to convert energy from the sun into a flow of electrons. The photovoltaic effect refers to photons of light exciting electrons into a higher state of energy, allowing them to act as charge carriers for an electric current. The photovoltaic effect was first observed by Alexandre-Edmond Becquerel in 1839.^[12][13] The term photovoltaic denotes the unbiased operating mode of a photodiode in which current through the device is entirely due to the transduced light energy. Virtually all photovoltaic devices are some type of photodiode.

Solar cells produce direct current electricity from sun light, which can be used to power equipment or to recharge a battery. The first practical application of photovoltaics was to power orbiting satellites and other spacecraft, but today the majority of photovoltaic modules are used for grid connected power generation. In this case an inverter is required to convert the DC to AC. There is a smaller market for off-grid power for remote dwellings, boats, recreational vehicles, electric cars, roadside emergency telephones, remote sensing, and cathodic protection of pipelines.

Photovoltaic power generation employs solar panels composed of a number of solar cells containing a photovoltaic material. Materials presently used for photovoltaics include monocrystalline silicon, polycrystalline silicon, amorphous silicon, cadmium telluride, and copper indium gallium selenide/sulfide.^[1] Due to the growing demand for renewable energy sources, the manufacturing of solar cells and photovoltaic arrays has advanced considerably in recent years.^[2][3][4]

Cells require protection from the environment and are usually packaged tightly behind a glass sheet. When more power is required than a single cell can deliver, cells are electrically connected together to form photovoltaic modules, or solar panels. A single module is enough to power an emergency telephone, but for a house or a power plant the modules must be arranged in multiples as arrays.

A significant market has emerged in off-grid locations for solar-power-charged storage-battery based solutions. These often provide the only electricity available.^[14] The first commercial installation of this kind was in 1966 on Ogami Island in Japan to transition Ogami Lighthouse from gas torch to fully self-sufficient electrical power.

Due to the growing demand for renewable energy sources, the manufacture of solar cells and photovoltaic arrays has advanced dramatically in recent years.^[2][3][4]

Solar photovoltaics is growing rapidly, albeit from a small base, to a total global capacity of 40 GW (40,000 MW) at the end of 2010. More than 100 countries use solar PV.^[6] Some 24 GW of solar is projected in November 2011 to be installed in that year, pushing up worldwide capacity to roughly 64 GW.^[15] Installations may be ground-mounted (and sometimes integrated with farming and grazing)^[7] or built into the roof or walls of a building (building-integrated photovoltaics).

World solar PV capacity (grid-connected) was 7.6 GW in 2007, 16 GW in 2008, 23 GW in 2009, and 40 GW in 2010.^[16][17][18]

Photovoltaic power capacity is measured as maximum power output under standardized test conditions (STC) in "Wp" (Watts peak).^[19] The actual power output at a particular point in time may be less than or greater than this standardized, or "rated," value, depending on geographical location, time of day, weather conditions, and other factors.^[20] Solar photovoltaic array capacity factors are typically under 25%, which is lower than many other industrial sources of electricity.^[21]

The EPIA/Greenpeace Advanced Scenario shows that by the year 2030, PV systems could be generating approximately 1.8 TW of electricity around the world. This means that, assuming a serious commitment is made to energy efficiency, enough solar power would be produced globally in twenty-five years’ time to satisfy the electricity needs of almost 14% of the world’s population.^[22]

Current developments

Map of solar electricity potential in Europe. Germany is the current leader in solar production.

Photovoltaic panels based on crystalline silicon modules are encountering competition in the market by panels that employ thin-film solar cells (CdTe^[23] CIGS,^[24] amorphous Si,^[25] microcrystalline Si), which had been rapidly evolving and are expected to account for 31 percent of the global installed power by 2013.^[26] However, precipitous drops in prices for polysilicon and their panels in late 2011 have caused some thin-film makers to exit the market and severely squeezing profits at others. ^[27] Other developments include casting wafers instead of sawing,^[28] concentrator modules, 'Sliver' cells, and continuous printing processes.

The San Jose-based company Sunpower produces cells that have an energy conversion ratio of 19.5%, well above the market average of 12–18%.^[29] The most efficient solar cell so far is a multi-junction concentrator solar cell with an efficiency of 43.5%^[30] produced by the National Renewable Energy Laboratory in April 2011. The highest efficiencies achieved without concentration include Sharp Corporation at 35.8% using a proprietary triple-junction manufacturing technology in 2009,^[31] and Boeing Spectrolab (40.7% also using a triple-layer design). A March 2010 experimental demonstration of a design by a Caltech group led by Harry Atwater which has an absorption efficiency of 85% in sunlight and 95% at certain wavelengths is claimed to have near perfect quantum efficiency.^[32] However, absorption efficiency should not be confused with the sunlight-to-electricity conversion efficiency.

For best performance, terrestrial PV systems aim to maximize the time they face the sun. Solar trackers achieve this by moving PV panels to follow the sun. The increase can be by as much as 20% in winter and by as much as 50% in summer. Static mounted systems can be optimized by analysis of the sun path. Panels are often set to latitude tilt, an angle equal to the latitude, but performance can be improved by adjusting the angle for summer or winter.^{[citation needed]} Generally, as with other semiconductor devices, temperatures above room temperature reduce the performance of photovoltaics.^[33]

The new European Photovoltaic Industry Association (EPIA) report predicts a promising future for photovoltaics. "The future of the PV market remains bright in the EU and the rest of the world," the report said. "Uncertain times are causing governments everywhere to rethink the future of their energy mix, creating new opportunities for a competitive, safe and reliable electricity source such as PV." By 2015, between 131 and 196 gigawatts (GW) of photovoltaic systems could be installed around the globe.^[34]

Economics

Financial incentives for photovoltaics, such as feed-in tariffs, have often been offered to electricity consumers to install and operate solar-electric generating systems. Government has sometimes also offered incentives in order to encourage the PV industry to achieve the economies of scale needed to compete where the cost of PV-generated electricity is above the cost from the existing grid. Such policies are implemented to promote national or territorial energy independence, high tech job creation and reduction of carbon dioxide emissions which cause global warming. Due to economies of scale solar panels get less costly as people use and buy more — as manufacturers increase production to meet demand, the cost and price is expected to drop in the years to come.

According to Shi Zhengrong, in 2012 unsubsidized PV systems already produce electricity in some parts of the world, more cheaply than coal and gas-fired power plants.^[35][36] As PV system prices decline it's inevitable that subsidies will end. "Rapid decline or outright disappearance has already been seen in all the major solar markets except China and India".^[36]

As of 2011, the price of PV modules per MW has fallen by 60 percent since the summer of 2008, according to Bloomberg New Energy Finance estimates, putting solar power for the first time on a competitive footing with the retail price of electricity in a number of sunny countries. There has been fierce competition in the supply chain, and further improvements in the levelised cost of energy for solar lie ahead, posing a growing threat to the dominance of fossil fuel generation sources in the next few years.^[37] As time progresses, renewable energy technologies generally get cheaper,^[38][39] while fossil fuels generally get more expensive:

The less solar power costs, the more favorably it compares to conventional power, and the more attractive it becomes to utilities and energy users around the globe. Utility-scale solar power can now be delivered in California at prices well below $100/MWh ($0.10/kWh) less than most other peak generators, even those running on low-cost natural gas. Lower solar module costs also stimulate demand from consumer markets where the cost of solar compares very favorably to retail electric rates.^[40]

As of 2011, the cost of PV has fallen well below that of nuclear power and is set to fall further. The average retail price of solar cells as monitored by the Solarbuzz group fell from $3.50/watt to $2.43/watt over the course of 2011, and a decline to prices below $2.00/watt seems inevitable:^[41]

For large-scale installations, prices below $1.00/watt are now common. In some locations, PV has reached grid parity, the cost at which it is competitive with coal or gas-fired generation. More generally, it is now evident that, given a carbon price of $50/ton, which would raise the price of coal-fired power by 5c/kWh, solar PV will be cost-competitive in most locations. The declining price of PV has been reflected in rapidly growing installations, totalling about 23 GW in 2011. Although some consolidation is likely in 2012, as firms try to restore profitability, strong growth seems likely to continue for the rest of the decade. Already, by one estimate, total investment in renewables for 2011 exceeded investment in carbon-based electricity generation.^[41]

Applications

80 MW Ohotnikovo Solar Park in Ukraine.

President Barack Obama speaks at the DeSoto Next Generation Solar Energy Center.

Power stations

Many solar photovoltaic power stations have been built, mainly in Europe.^[42] As of December 2011, the largest photovoltaic (PV) power plants in the world are the Golmud Solar Park (China, 200 MW), Sarnia Photovoltaic Power Plant (Canada, 97 MW), Montalto di Castro Photovoltaic Power Station (Italy, 84.2 MW), Finsterwalde Solar Park (Germany, 80.7 MW), Ohotnikovo Solar Park (Ukraine, 80 MW), Lieberose Photovoltaic Park (Germany, 71.8 MW), Rovigo Photovoltaic Power Plant (Italy, 70 MW), Olmedilla Photovoltaic Park (Spain, 60 MW), and the Strasskirchen Solar Park (Germany, 54 MW).^[42]

There are also many large plants under construction. The Desert Sunlight Project is a 550 MW solar power plant under construction in Riverside County, California, that will use thin-film solar photovoltaic modules made by First Solar.^[43] The Blythe Solar Power Project is a 500 MW photovoltaic station under construction in Riverside County, California. The Agua Caliente Solar Project is a 290 megawatt photovoltaic solar generating facility being built in Yuma County, Arizona. The California Valley Solar Ranch (CVSR) is a 250 megawatt (MW) solar photovoltaic power plant, which is being built by SunPower in the Carrizo Plain, northeast of California Valley.^[44] The 230 MW Antelope Valley Solar Ranch is a First Solar photovoltaic project which is under construction in the Antelope Valley area of the Western Mojave Desert, and due to be completed in 2013.^[45] The Mesquite Solar project is a photovoltaic solar power plant being built in Arlington, Maricopa County, Arizona, owned by Sempra Generation.^[46] Phase 1 will have a nameplate capacity of 150 megawatts.^[47]

Many of these plants are integrated with agriculture and some use innovative tracking systems that follow the sun's daily path across the sky to generate more electricity than conventional fixed-mounted systems. There are no fuel costs or emissions during operation of the power stations.

In buildings

Photovoltaic wall at MNACTEC Terrassa in Spain

Photovoltaic arrays are often associated with buildings: either integrated into them, mounted on them or mounted nearby on the ground.

Arrays are most often retrofitted into existing buildings, usually mounted on top of the existing roof structure or on the existing walls. Alternatively, an array can be located separately from the building but connected by cable to supply power for the building. In 2010, more than four-fifths of the 9,000 MW of solar PV operating in Germany were installed on rooftops.^[48] Building-integrated photovoltaics (BIPV) are increasingly incorporated into new domestic and industrial buildings as a principal or ancillary source of electrical power.^[49] Typically, an array is incorporated into the roof or walls of a building. Roof tiles with integrated PV cells are also common. A 2011 study using thermal imaging has shown that solar panels, provided there is an open gap in which air can circulate between them and the roof, provide a passive cooling effect on buildings during the day and also keep accumulated heat in at night.^[50]

The power output of photovoltaic systems for installation in buildings is usually described in kilowatt-peak units (kWp).

In transport

PV has traditionally been used for electric power in space. PV is rarely used to provide motive power in transport applications, but is being used increasingly to provide auxiliary power in boats and cars. A self-contained solar vehicle would have limited power and low utility, but a solar-charged vehicle would allow use of solar power for transportation. Solar-powered cars have been demonstrated.^[51]

Standalone devices

Solar parking paystation.

Until a decade or so ago, PV was used frequently to power calculators and novelty devices. Improvements in integrated circuits and low power liquid crystal displays make it possible to power such devices for several years between battery changes, making PV use less common. In contrast, solar powered remote fixed devices have seen increasing use recently in locations where significant connection cost makes grid power prohibitively expensive. Such applications include water pumps,^[52] parking meters,^[53][54] emergency telephones,^[55] trash compactors,^[56] temporary traffic signs, and remote guard posts and signals.

Rural electrification

Unlike the past decade, which saw solar solutions purchased mainly by international donors, it is now the locals who are increasingly opening their wallets to make the switch from their traditional energy means. That is because solar products prices in recent years have declined to become cheaper than kerosene and batteries.

In Cambodia, for example, villagers can buy a solar lantern at US$25 and use it for years without any extra costs, where their previous spending on kerosene for lighting was about $2.5 per month, or $30 per year. In Kenya a solar kit that provides bright light or powers a radio or cell phone costs under $30 at retail stores. By switching to this kit Kenyans can save $120 per year on kerosene lighting, radio batteries and cell phone recharging fees.^[57]

Developing countries where many villages are often more than five kilometers away from grid power are increasingly using photovoltaics. In remote locations in India a rural lighting program has been providing solar powered LED lighting to replace kerosene lamps. The solar powered lamps were sold at about the cost of a few months' supply of kerosene.^[58][59] Cuba is working to provide solar power for areas that are off grid.^[60] These are areas where the social costs and benefits offer an excellent case for going solar though the lack of profitability could relegate such endeavors to humanitarian goals.

Solar roadways

The 104kW solar highway along the interchange of Interstate 5 and Interstate 205 near Tualatin, Oregon in December 2008.

In December 2008, the Oregon Department of Transportation placed in service the nation’s first solar photovoltaic system in a U.S. highway right-of-way. The 104-kilowatt (kW) array produces enough electricity to offset approximately one-third of the electricity needed to light the Interstate highway interchange where it is located.^[61]

A 45 mi (72 km) section of roadway in Idaho is being used to test the possibility of installing solar panels into the road surface, as roads are generally unobstructed to the sun and represent about the percentage of land area needed to replace other energy sources with solar power.^[62]

Solar Power satellites

Design studies of large solar power collection satellites have been conducted for decades. The idea was first proposed by Peter Glaser, then of Arthur D. Little Inc; NASA conducted a long series of engineering and economic feasibility studies in the 1970s, and interest has revived in first years of the 21st century. A key issue for such satellites appears to be the launch cost, which so far makes space-based solar power at least 100 times more expensive than terrestrial solar power.

Advantages

The 89 PW of sunlight reaching the Earth's surface is plentiful – almost 6,000 times more than the 15 TW equivalent of average power consumed by humans.^[63] Additionally, solar electric generation has the highest power density (global mean of 170 W/m²) among renewable energies.^[63]

Solar power is pollution-free during use. Production end-wastes and emissions are manageable using existing pollution controls. End-of-use recycling technologies are under development ^[64] and policies are being produced that encourage recycling from producers.^[65]

PV installations can operate for many years with little maintenance or intervention after their initial set-up, so after the initial capital cost of building any solar power plant, operating costs are extremely low compared to existing power technologies.

Grid-connected solar electricity can be used locally thus reducing transmission/distribution losses (transmission losses in the US were approximately 7.2% in 1995).^[66]

Compared to fossil and nuclear energy sources, very little research money has been invested in the development of solar cells, so there is considerable room for improvement. Nevertheless, experimental high efficiency solar cells already have efficiencies of over 40% in case of concentrating photovoltaic cells ^[67] and efficiencies are rapidly rising while mass-production costs are rapidly falling.^[68]

Disadvantages

Photovoltaic panels are specifically excluded in Europe from RoHS (Restriction on Hazardous Substances) since 2003 and were again excluded in 2011. California has largely adopted the RoHS standard through EWRA. Therefore, PV panels may legally in Europe and California contain lead, mercury and cadmium which are forbidden or restricted in all other electronics.^[69]

In some states of the United States of America, much of the investment in a home-mounted system may be lost if the home-owner moves and the buyer puts less value on the system than the seller. The city of Berkeley has come up with an innovative financing method to remove this limitation, by adding a tax assessment that is transferred with the home to pay for the solar panels. (See: "Berkeley FIRST Solar Financing – City of Berkeley, CA". cityofberkeley.info. http://www.cityofberkeley.info/ContentDisplay.aspx?id=26580. Retrieved September 7, 2010. ) 28 U.S. states have duplicated this solution.</ref>

See also

Active solar American Solar Energy Society Anomalous photovoltaic effect Carbon nanotubes in photovoltaics Concentrated photovoltaics Cost of electricity by source CZTS Deployment of solar power to energy grids Electromotive_force#Solar_cell History of photovoltaics List of photovoltaics companies List of solar cell manufacturers Maximum power point tracker

Energy portal Renewable energy portal Environment portal Sustainable development portal Photoelectrochemical cell Photovoltaic and renewable energy engineering in Australia Photovoltaic cell Quantum efficiency of a solar cell Quantum efficiency Solar cell research Solar energy Solar Module Quality Assurance Solar photovoltaic monitoring Solar thermal energy Theory of solar cell Thermophotovoltaics

References

Wikimedia Commons has media related to: Photovoltaics

v d e Photovoltaics Concepts Photoelectric effect Photovoltaics History of photovoltaics Timeline of solar cells Solar insolation Solar constant Solar cell efficiency Third generation photovoltaic cell Solar cell research Quantum efficiency of a solar cell Cadmium telluride Thermophotovoltaic Polycrystalline silicon photovoltaics Thermodynamic efficiency limit Sun-free photovoltaics Polarizing organic photovoltaics Photovoltaic system Solar cells Solar cell Solar panel Thin film solar cell Polymer solar cell Nanocrystal solar cell Organic solar cell Quantum dot solar cell Hybrid solar cell Plasmonic solar cell Carbon nanotubes in photovoltaics Dye-sensitized solar cell Cadmium telluride photovoltaics Copper indium gallium selenide solar cells Multijunction photovoltaic cell Printed solar panel System components Solar charge controller Solar inverter Solar micro-inverter Solar cable Solar combiner box Photovoltaic mounting system Maximum power point tracker Solar tracker Solar shingles Solar mirror System concepts Perturb and observe method Incremental conductance method Constant voltage method Fill factor Concentrated photovoltaics Photovoltaic thermal hybrid solar collector Space-based solar power Watt-peak Applications Appliances Solar-powered refrigerator Solar air conditioning Solar lamp Solar charger Solar backpack Solar tree Solar-powered pump Solar-powered watch Solar Tuki Photovoltaic keyboard Solar road stud Solar cell phone charger Solar notebook Solar powered calculator Solar powered fountain Solar powered radio Solar powered flashlight Solar fan Solar street light Solar traffic light Land transport Solar vehicle Solar car Solar roadway Solar golf cart The Quiet Achiever Sunmobile Air transport Electric aircraft Mauro Solar Riser Solar panels on spacecraft Solar-Powered Aircraft Developments Solar One Gossamer Penguin Qinetiq Zephyr Solar Challenger Water transport Solar boat Solar vehicle racing Solar car racing List of solar car teams Solar challenge Solar Cup Blue Sky Solar Racing Frisian Solar Challenge UC Solar Team Solar Splash South African Solar Challenge Tour de Sol World Solar Challenge Hunt-Winston School Solar Car Challenge North American Solar Challenge Victorian Model Solar Vehicle Challenge Generation systems Solar Energy Generating Systems Stand-alone photovoltaic power system Grid-connected photovoltaic power system Rooftop photovoltaic power station Topaz Solar Farm Solar Ark Solar Umbrella house Erlasee Solar Park Guadarranque solar power plant Pocking Solar Park Copper Mountain Solar Facility Wyandot Solar Facility Köthen Solar Park Building-integrated photovoltaics Moura Photovoltaic Power Station Nevada Solar One Beneixama photovoltaic power plant Gottelborn Solar Park Darro Solar Park Olmedilla Photovoltaic Park Blythe Photovoltaic Power Plant Strasskirchen Solar Park Puertollano Photovoltaic Park Alamosa photovoltaic power plant By country List of countries by photovoltaics production PV companies List of photovoltaics companies Category ·  Commons