| R-2800 Double Wasp | |
|---|---|
 |
|
| A preserved R-2800 Double Wasp | |
| Type | Radial engine |
| National origin | United States |
| Manufacturer | Pratt & Whitney |
| First run | 1937 |
| Major applications | A-26 Invader CH-37 Mojave Douglas DC-6 F4U Corsair F6F Hellcat P-47 Thunderbolt |
| Number built | 125,334 |
The Pratt & Whitney R-2800 Double Wasp is a two-row, 18-cylinder, air-cooled radial aircraft engine with a displacement of 2,804 in³ (46 L), and is part of the long-lived Wasp family.
The R-2800 is considered one of the premier radial piston engines ever designed and is notable for its widespread use in many important American aircraft during and after World War II. During the war years, Pratt & Whitney continued to develop new ideas to upgrade this already powerful workhorse, most notably water injection to give emergency power in combat.
Contents |
Design and development
First run in 1937,[1] the R-2800 was America's first 18-cylinder radial engine design. The Double Wasp was more powerful than the world's only other modern eighteen, the Gnome-Rhône 18L of 3,442 in³ (56.4 L), but it was much smaller and heat dissipation was a greater problem. To enable more efficient cooling, the usual practice of casting or forging the cylinder head cooling fins that had been effective enough for other engine designs was discarded, and instead, much thinner and closer-pitched cooling fins were machined from the solid metal of the head forging. The fins were all cut at the same time by a gang of milling saws, automatically guided as it fed across the head in such a way that the bottom of the grooves rose and fell to make the roots of the fins follow the contour of the head. Cylinder cooling was effected by aluminium cooling muffs that were shrunk onto the steel alloy forged barrels. In addition to requiring a new cylinder head design, the Double Wasp was probably the most difficult to effectively direct a flow of cooling air around.[2]
In 1939, when the R-2800 was introduced it was capable of producing 2,000 hp (1,500 kW), for a specific power value of 0.71 hp/in³ (32.6 kW/L). No other air-cooled engine came close to this figure, and even liquid-cooled ones barely matched it. The designing of conventional air-cooled radial engines had become so scientific and systematic by then that the Double Wasp was introduced at a power rating that was not amenable to anything like the developmental power increases that had been common with earlier engines. Nevertheless, in 1941 the power output of production models increased to 2,100 hp (1,600 kW), and to 2,400 hp (1,800 kW) late in the war. However, even more was coaxed from experimental models, with fan-cooled subtypes producing 2,800 hp (2,100 kW), but in general the R-2800 was a rather highly developed powerplant right from the beginning.[2]
The R-2800 was used to power several types of fighters and medium bombers during the war, notably the US Navy's F4U Corsair and F6F Hellcat, the US Army Air Forces' P-47 Thunderbolt, and the twin-engined B-26 Marauder and A-26 Invader. When the US entered the war in December 1941 there were very quickly some major changes in philosophy, and such long-established engines as the Wright Cyclone and Double Wasp were re-rated on fuel of much higher octane rating (anti-knock value) to give considerably more power, and by 1944 versions of the R-2800 powering late-model P-47s (and other aircraft) had a rating (experimental) of 2,800 hp on 115-grade fuel with water injection.[2]
After World War II, the engine was used in the Korean War, and surplus World War II aircraft powered by the Double Wasp served with other countries well past the Korean War, some being retired as late as the latter part of the 1960s when the aircraft were replaced.[1]
Peace time
Engines naturally grow in power with development, but a major war demands the utmost performance from engines fitted to aircraft whose life in front-line service was unlikely to exceed 50 hours' flying, over a period of only a month or two. In peace time however, the call was for reliability over a period of perhaps a dozen years, and the R-2800's reliability commended its use for long-range patrol aircraft and for the Douglas DC-6, Martin 4-0-4, and Convair transports. This last application is noteworthy, since these were twin-engine aircraft of size, passenger capacity, and high wing loading comparable with the DC-4 and the first Constellations.[2]
Today, more than 60 years after the first Double Wasp was built, it is still used in many restored vintage warbird aircraft displayed at air shows, and sees frequent service worldwide on aircraft such as the Canadair CL-215 water-bomber. A total of 125,334 R-2800 engines were produced between 1939 and 1960.[1]
Variants
Note: The suffix W eg: -10W denotes engines using water injection equipment, used to increase power for short periods. Suffixes such as -S14A-G denote engines developed for export to other countries.
|
|
Applications
The following is a partial list of aircraft that were powered by the R-2800 (and a few prototypes that utilized it at one point):
|
|
Specifications (R-2800-54)
Data from FAA TCDS[3]
General characteristics
- Type: 18-cylinder air-cooled two-row radial engine with water injection
- Bore: 5.75 in (146.05 mm)
- Stroke: 6 in (152.4 mm)
- Displacement: 2,804.5 in³ (45.96 L)
- Diameter: 52.8 in (1,342 mm)
- Dry weight: 2,360 lb (1,073 kg)
Components
- Valvetrain: Poppet, two valves per cylinder
- Supercharger: Variable-speed (in F8F-2, unified with throttle via AEC automatic engine control), single-stage single-speed centrifugal type supercharger
- Fuel system: One Stromberg injection carburetor
- Fuel type: 100/130 octane gasoline
- Cooling system: Air-cooled
Performance
- Power output: 2,100 hp (1,567 kW) @ 2,700 rpm
- Specific power: 0.75 hp/in³ (34.1 kW/L)
- Power-to-weight ratio: 0.89 hp/lb (1.46 kW/kg)
See also
Related development
- Pratt & Whitney Wasp series
- Pratt & Whitney R-985 Wasp Junior
- Pratt & Whitney R-1340 Wasp
- Pratt & Whitney R-1535 Twin Wasp Junior
- Pratt & Whitney R-1830 Twin Wasp
- R-2000 Twin Wasp
- Pratt & Whitney R-4360 Wasp Major
Comparable engines
Related lists
References
Notes
- ^ a b c Pratt & Whitney R-2800 page Retrieved: 25 October 2008
- ^ a b c d Pratt and Whitney R-2800 The Aviation History Online Museum. Retrieved: 23 February 2009.
- ^ FAA Type Certificate Data Sheet Retrieved: 30 October 2008
Bibliography
- Gunston, Bill. World Encyclopedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN 1-85260-163-9
- Bridgman, Leonard, ed. Jane's All The World's Aircraft 1951–1952. London: Samson Low, Marston & Company, Ltd 1951.
External links
 |
Wikimedia Commons has media related to: Pratt & Whitney R-2800 |
|
||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
|
||||||||||||||
This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)
