roughneck

This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (November 2008)

This article may require copy-editing for grammar, style, cohesion, tone or spelling. You can assist by editing it now. (November 2008)

Lewis Hine's 1920 Power house mechanic working on steam pump.

Roughneck (or ruffneck) is a slang term for an unskilled or slightly skilled labourer in a number of industries. In particular, it is the official name of a semi-skilled role on an oil rig. In Australia, a roughneck is known as an Offsider.

Originally the term was used in the traveling carnivals of 19th century America, almost interchangeably with roustabout. By the 1930s the terms had transferred to the oil drilling industry.

In the United Kingdom oil industry (1970s onwards) the term roughneck was specifically for the moderately skilled people who worked on the drill floor of a drilling rig, actually handling the specialised equipment for drilling, pressure control, etc. In practice, these workers ranged from unskilled to highly skilled, depending subjectively on the individual worker's aptitude and experience. By contrast, a roustabout would perform more general labor, such as loading and unloading cargo from crane baskets, and being assistants to the welder, mechanic, electrician and other skilled workers. Usage in America and globally by USA-headquartered drilling contractors was similar even earlier, and the terms had spread to the rest of the world at least by the mid-1990s.

Oil field roughnecks

A roughneck.

In oilfields, roughneck is one of several roles in the hierarchy on an oil rig. A roughneck's duties could include anything involved with the connecting and "tripping" of pipe down the well bore, and the roughneck is the person when it comes to general work around the rig. The roughneck is part of the crew, and the generic job is known as "roughnecking."

The crew of a land-based oil rig can be further divided into several positions:

Toolpusher: The boss of all crews on the drilling location. He may stay on location for a few days at a time during crucial operations, whereas the individual drilling crews work only 8- or 12-hour shifts (also called tours but pronounced as towers).

Driller: The head or boss of the crew. Responsible for the control of the rig's machinery during drilling operation and most other rig operations.

Derrickhand (derrick-man): Responsible for the "mud," the water, or oil based mud; the mud pits where drilling fluids are circulated around the system, and the mud pump. Drilling mud is a mixture used in drilling oil and gas wells to lubricate the hole and keep formation fluids down hole. Also assumes the position in the derrick, usually 80 to 110 feet off the ground, while "tripping pipe." That is the process of "racking" 90 feet or 60 feet lengths of drill pipe back in the mast when pulling out of the hole and the reverse of this when running in the hole.

Motorman (motorhand): Responsible for the maintenance of the various engines, water pumps, water lines, steam lines, boilers (but see below), and various other machinery incorporated into the rig. On a four-man drilling crew the motorman is also the chainhand.

Boilerman: (obsolescent) Rigs were powered by steam up to and occasionally beyond the mid-20th century, and often an additional crew person known as the boilerman was responsible for the boilers including treating the feed water. This was a full time job with the heavy but intermittent steam demands while tripping. (The boilerman also functioned as the laundryman, steam-cleaning the last crew's greasy workclothes in the "blow barrel" and then hanging them up to dry in the warm air near the boilers.)

Floorhand (chainhand): Works the "make-up" tongs on the Driller side of the drilling floor while tripping pipe in the hole. Traditionally, pipe was tripped by throwing chain (wrapping a chain around the bottom pipe, attaching the new piece of pipe, and "throwing" the chain to make it jump to the new piece before drawing in the chain to fully attach the new pipe). Today, throwing chain is considered dangerous by OSHA and is against its regulations. Most roughnecks see it otherwise, but various safer machines are now used to trip pipe. These safer machines are almost without exception markedly slower for tripping pipe, which is probably the reason for the roughnecks' disdain.

Leadhand (worm): Also a floorhand, usually the lowest member of the drilling crew. Works the "break-out" or lead tongs on the off-driller side of the drilling floor. The position on the off-driller side of the floor that this person works is referred to as the "worm-hole." "Worm" is often used as a derogatory term among more experienced roughnecks.

Roustabout (leasehand): On bigger rigs and on offshore rigs a person who does most of the painting and cleaning so roughnecks can take care of other work.

Ginsel: The worm's helper. Also derogatory insult given from roughneck to roughneck. Also called the fifth hand.

Roughneck in culture

The Edmonton Oilers of the National Hockey League used to use an oil rigging roughneck, with a hockey stick, as one of their secondary logos. The roughneck, as a symbol of hard work and toughness, was the inspiration for the Calgary Roughnecks lacrosse and the Tulsa Roughnecks North American Soccer League and United Soccer Leagues teams to adopt that name. Roughneck as a symbol for hard work and rugged blue collar ideals was also inspiration for the San Francisco, CA based skateboard bolts brand, Roughneck Hardware. Rubbermaid has used the name "Roughneck" for trash containers and storage totes since the mid 1970's.

Roughneck is also the nick name of the fictional platoon in Starship Troopers.

The square-jawed visage of "Joe Roughneck" is an advertising symbol (created by artist Torg Thompson) of Lone Star Steel Company.^[1]

References

External links

• Latest on Roughneck Jobs
• Fallen Roughneck
• Roughneck Job Description
• Description of Various Rig Employee Functions