SO-DIMM

Please help improve this article by expanding it. Further information might be found on the talk page. (May 2009)

PC6400 DDR2 SO-DIMM

A SO-DIMM, or small outline dual in-line memory module, is a type of computer memory built using integrated circuits.

SO-DIMMs (also written SODIMMs) are a smaller alternative to a DIMM, being roughly half the size of regular DIMMs. SO-DIMMS are often used in systems which have space restrictions such as notebooks, small footprint PCs (such as those with a Mini-ITX motherboard), high-end upgradable office printers, and networking hardware like routers.

SO-DIMMs have 72, 100, 144, 200 or 204 pins. The 72 and 100 pin packages supports 32-bit data transfer, while the 144, 200 and 204 pin packages support 64-bit data transfer. This compares to regular DIMMs that have 168, 184, or 240 pins, all supporting 64-bit data transfer.^{[citation needed]}

Most types of SO-DIMMs can be recognized at a glance by the distinctive notches used to "key" them for different applications: 100-pin SO-DIMMs have two notches, 144-pin SO-DIMMs have a single notch near (but not at) the center, and 200-pin SO-DIMMs have a single notch nearer to one side.

It is requested that a diagram or diagrams be included in this article to improve its quality. For more information, refer to discussion on this page and/or the listing at Wikipedia:Requested images.

The 200-pin SO-DIMM notch is in one of two locations. If the notch is located away from the center, it indicates the DDR class of memory. When the notch is located nearer the center of the board, it generally (but not always) indicates that the RAM is of the DDR2 type. These two types of memory are not interchangeable. The different notch locations are designed to prevent cross-installation. Keep this in mind when attempting to visually identify 200-pin SO-DIMM modules.

SO-DIMMs are more or less equal in power and voltage rating to DIMMs, and as memory technology moves forward, both SO-DIMMs and DIMMs become available in equal speed^{[clarification needed]} (clock speeds such as 400 MHz PC-3200, for example, and CAS latency such as 2.0, 2.5, and 3.0) and capacity (512MB, 1GB, etc.).

DDR2 SO-DIMM memory modules commonly have clock speeds from 200 MHz up to 800 MHz PC2-6400.

The latest 204-pin SO-DIMMs support DDR3 SDRAM, with specifications such as PC3-6400, PC3-8500, PC3-10600, and PC3-12800.^[1]

See also

• DDR SDRAM
• DDR2 SDRAM
• DDR3 SDRAM

References

This article includes a list of references, related reading or external links, but its sources remain unclear because it lacks inline citations. Please improve this article by introducing more precise citations where appropriate. (September 2009)

External links

• How to Install PC Memory Guides

Wikimedia Commons has media related to: SO-DIMM