Surface plasmon: Information from Answers.com

Schematic representation of an electron density wave propagating along a metal - dielectric interface. The charge density oscillations and associated electromagnetic fields are called surface plasmon-polariton waves. The exponential dependence of the electromagnetic field intensity on the distance away from the interface is shown on the right. These waves can be excited very efficiently with light in the visible range of the electromagnetic spectrum.

Surface plasmons (SPs), are coherent electron oscillations that exist at the interface between any two materials where the real part of the dielectric function changes sign across the interface (e.g. a metal-dielectric interface, such as a metal sheet in air). SPs have lower energy than bulk (or volume) plasmons which quantise the longitudinal electron oscillations about positive ion cores within the bulk of an electron gas (or plasma). When SPs couple with a photon, the resulting hybridised excitation is called a surface plasmon polariton (SPP). This SPP can propagate along the surface of a metal until energy is lost either via absorption in the metal or radiation into free-space. The existence of surface plasmons was first predicted in 1957 by R.H. Ritchie^[1]. In the following two decades, surface plasmons were extensively studied by many scientists, the foremost of whom were Heinz Raether, E. Kretschmann, and A. Otto.

1 Excitation
2 Dispersion relation
3 Propagation length and skin depth
4 Effects of roughness
5 Experimental applications
6 See also
7 References
8 External links

Excitation

Figure 1: (a) Kretschmann and (b) Otto configuration of an Attenuated Total Reflection setup for coupling surface plasmons. In both cases, the surface plasmon propagates along the metal/dielectric interface

Figure 2: Grating Coupler for Surface Plasmons. The wave vector is increased by the spatial frequency

Surface plasmons can be excited by both electrons and photons. Excitation by electrons is created by firing electrons into the bulk of a metal. As the electrons scatter, energy is transferred into the bulk plasma. The component of the scattering vector parallel to the surface results in the formation of a surface plasmon.

Coupling of photons into SPPs can be achieved using a coupling medium such as a prism or grating to match the photon and surface plasmon wave vectors. A prism can be positioned against a thin metal film in the Kretschmann configuration or very close to a metal surface in the Otto configuration (Figure 1). A grating coupler matches the wave vectors by increasing the parallel wave vector component by an amount related to the grating period (Figure 2). This method, while less frequently utilized, is critical to the theoretical understanding of the impact of surface roughness. Moreover, simple isolated surface defects such as a groove, a slit or a corrugation on an otherwise planar surface provides a mechanism by which free-space radiation and SPPs can exchange energy and hence couple.

Dispersion relation

Figure 3: Coordinate system for 2 material interface

The electric field of a propagating electromagnetic wave can be expressed

$E= E_{0}\exp[i(k_{x} x + k_{z} z -\omega t)]\,$

where k is the wave number and ω is the frequency of the wave. By solving Maxwell's equations for the electromagnetic wave at an interface between two materials with relative dielectric functions ε₁ and ε₂ (see figure 3) with the appropriate continuity relation the boundary conditions are^[2] ^[3]

$\frac{k_{z1}}{\varepsilon_1} + \frac{k_{z2}}{\varepsilon_2} = 0$

and

$k_{x}^2+k_{zi}^2=\varepsilon_i \left(\frac{\omega}{c}\right)^2 \qquad i=1,2$

where c is the speed of light in a vacuum. Solving these two equations, the dispersion relation for a wave propagating on the surface is

$k_{x}=\frac{\omega}{c} \left(\frac{\varepsilon_1\varepsilon_2}{ \varepsilon_1+\varepsilon_2}\right)^{1/2}.$

Figure 4: Dispersion curve for surface plasmons. At low k, the surface plasmon curve (red) approaches the photon curve (blue)

In the free electron model of an electron gas, which neglects attenuation, the metallic dielectric function is^[4]

$\varepsilon(\omega)=1-\frac{\omega_{P}^2}{\omega^2},$

where the bulk plasma frequency in SI units is

$\omega_{P}=\sqrt{\frac{n e^2}{{\varepsilon_0}m^*}}$

where n is the electron density, e is the charge of the electron, m^* is the effective mass of the electron and ${\varepsilon_0}$ is the permittivity of free-space. The dispersion relation is plotted in Figure 4. At low k, the SPP behaves like a photon, but as k increases, the dispersion relation bends over and reaches an asymptotic limit corresponding to the surface plasma frequency. Since the dispersion curve lies to the right of the light line, ω = k·c, the SPP has a shorter wavelength than free-space radiation such that the out-of-plane component of the SPP is purely imaginary and exhibits evanescent decay. The surface plasma frequency is given by

$\omega_{SP}=\omega_P/\sqrt{1+\varepsilon_2}.$

In the case of air, this result simplifies to

$\omega_{SP}=\omega_P/\sqrt{2}.$

If we assume that ε₂ is real and ε₂ > 0, then it must be true that ε₁ < 0, a condition which is satisfied in metals. Electromagnetic waves passing through a metal experience damping due to Ohmic losses and electron-core interactions. These effects show up in as an imaginary component of the dielectric function. The dielectric function of a metal is expressed ε₁ = ε₁' + i·ε₁" where ε₁' and ε₁" are the real and imaginary parts of the dielectric function, respectively. Generally |ε₁'| >> ε₁" so the wavenumber can be expressed in terms of its real and imaginary components as^[2]

$k_{x}=k_{x}'+i k_{x}''=\left[\frac{\omega}{c} \left( \frac{\varepsilon_1' \varepsilon_2}{\varepsilon_1' + \varepsilon_2}\right)^{1/2}\right] + i \left[\frac{\omega}{c} \left( \frac{\varepsilon_1' \varepsilon_2}{\varepsilon_1' + \varepsilon_2}\right)^{3/2} \frac{\varepsilon_1''}{2(\varepsilon_1')^2}\right].$

The wave vector gives us insight into physically meaningful properties of the electromagnetic wave such as its spatial extent and coupling requirements for wave vector matching.

Propagation length and skin depth

Condensed matter physics

Phases · Phase transition

States of matter
Solid · Liquid · Gas · Bose-Einstein condensate · Fermionic condensate · Fermi gas · Fermi liquid · Supersolid · Superfluid · Luttinger liquid

Phase phenomena
Order parameter · Phase transition

Electronic phases
Insulator · Mott insulator · Semiconductor · Semimetal · Conductor · Superconductor · Thermoelectric · Piezoelectric · Ferroelectric

Electronic phenomena
Quantum Hall effect · Spin Hall effect · Kondo effect

Magnetic phases
Diamagnet · Superdiamagnet Paramagnet · Superparamagnet Ferromagnet · Antiferromagnet Ferrimagnet · Metamagnet Spin glass

Quasiparticles
Phonon · Exciton · Plasmon Polariton · Polaron · Magnon

Soft matter
Amorphous solid · Granular matter · Liquid crystal · Polymer

Scientists
Maxwell · Van der Waals · Debye · Bloch · Onsager · Mott · Peierls · Landau · Luttinger · Anderson · Bardeen · Cooper · Schrieffer · Josephson · Landau · Kohn · Kadanoff · Fisher

As an SPP propagates along the surface, it loses energy to the metal due to absorption. The intensity of the surface plasmon decays with the square of the electric field, so at a distance x, the intensity has decreased by a factor of exp[-2k_x"x]. The propagation length is defined as the distance for the SPP intensity to decay by a factor of 1/e. This condition is satisfied at a length^[5]

$L=\frac{1}{2 k_{x}''}.$

Likewise, the electric field falls off evanescently perpendicular to the metal surface. At low frequencies, the SPP penetration depth into the metal is commonly approximated using the skin depth formula. In the dielectric, the field will fall off far more slowly. The decay lengths in the metal and dielectric medium can be expressed as^[5]

$z_{i}=\frac{\lambda}{2 \pi} \left(\frac{|\varepsilon_1'|+\varepsilon_2}{\varepsilon_i^2} \right)^{1/2}$

where i indicates the medium of propagation. Surface plasmons are very sensitive to slight perturbations within the skin depth and because of this, surface plasmons are often used to probe inhomogeneities of a surface.

Effects of roughness

In order to understand the effect of roughness on surface plasmons, it is beneficial to first understand how a plasmon is coupled by a grating (Figure 2). When a photon is incident on a surface, the wave vector of the photon in the dielectric material is smaller than that of the SPP. In order for the photon to couple into a SPP, the wave vector must increase by $Δ k = k S P - k x,photon$ . The grating harmonics of a periodic grating provide additional momentum parallel to the supporting interface to match the terms.

$k_{SP}=k_{x, \text{photon}} \pm n\ k_\text{grating}=\frac{\omega}{c} \sin{\theta_0} \pm n \frac{2\pi}{a}$

where $k grating$ is the wave vector of the grating, $θ 0$ is the angle of incidence of the incoming photon, a is the grating period, and n is an integer.

Rough surfaces can be thought of as the superposition of many gratings of different periodicities. Kretschmann proposed^[6] that a statistical correlation function be defined for a rough surface

$G(x,y)=\frac{1}{A}\int_A z(x',y')\ z(x'-x,y'-y)\, dx'\, dy'$

where $z (x, y)$ is the height above the mean surface height at the position $(x, y)$ , and $A$ is the area of integration. Assuming that the statistical correlation function is be Gaussian of the form

$G(x,y)=\delta^2\exp\left(-\frac{r^2}{\sigma^2}\right)$

where $δ$ is the root mean square height, $r$ is the distance from the point $(x, y)$ , and $σ$ is the correlation length, then the Fourier transform of the correlation function is

$|s(k_\text{surf})|^2=\frac{1}{4 \pi} \sigma^2 \delta^2 \exp \left( - \frac{\sigma^2 k_\text{surf}^2}{4}\right)$

where $s$ is a measure of the amount of each spatial frequency $k surf$ which help couple photons into a surface plasmon.

If the surface only has one Fourier component of roughness (i.e. the surface profile is sinusoidal), then the $s$ is discrete and exists only at $k=\frac{2\pi}{a}$ , resulting in a single narrow set of angles for coupling. If the surface contains many Fourier components, then coupling becomes possible at multiple angles. For a random surface, $s$ becomes continuous and the range of coupling angles broadens.

As stated earlier, surface plasmons are non-radiative. When a surface plasmon travels along a rough surface, it usually becomes radiative due to scattering. The Surface Scattering Theory of light suggests that the scattered intensity $d I$ per solid angle $d Ω$ per incident intensity $I 0$ is^[7]

$\frac{dI}{ d \Omega\ I_{0}}=\frac{4 \sqrt{\varepsilon_{0}}}{\cos{\theta_0}}\frac{\pi^4}{\lambda^4}|t_{012}^p|^2 \ |W|^2 |s(k_\text{surf})|^2$

where $| W | 2$ is the radiation pattern from a single dipole at the metal/dielectric interface. If surface plasmons are excited in the Kretschmann geometry and the scattered light is observed in the plane of incidence (Fig. 4), then the dipole function becomes

$|W|^2=A(\theta,|\varepsilon_{1}|)\ \sin^2{\psi} \ [(1+\sin^2 \theta /|\varepsilon_1|)^{1/2} - \sin{\theta}]^2$

with

$A(\theta,|\varepsilon_1|) = \frac{|\varepsilon_1|+1}{|\varepsilon_1|-1} \frac{4}{1+\tan{\theta}/| \varepsilon_1|}$

where $ψ$ is the polarization angle and $θ$ is the angle from the z-axis in the xz-plane. Two important consequences come out of these equations. The first is that if $ψ = 0$ (s-polarization), then $| W | 2 = 0$ and the scattered light $\frac{dI}{ d \Omega\ I_{0}}=0$ . Secondly, the scattered light has a measurable profile which is readily correlated to the roughness. This topic is treated in greater detail in reference ^[7].

Experimental applications

The excitation of surface plasmons is frequently used in an experimental technique known as surface plasmon resonance (SPR). In SPR, the maximum excitation of surface plasmons are detected by monitoring the reflected power from a prism coupler as a function of incident angle or wavelength. This technique can be used to observe nanometer changes in thickness, density fluctuations, or molecular adsorption.

In surface second harmonic generation, the second harmonic signal is proportional to the square of the electric field. The electric field is stronger at the interface because of the surface plasmon. This larger signal is often exploited to produce a stronger second harmonic signal.

The wavelength and intensity of the plasmon-related absorption and emission peaks are affected by molecular adsorption that can be used in molecular sensors. For example, a fully operational prototype device detecting casein in milk has been fabricated. The device is based on monitoring changes in plasmon-related absorption of light by a gold layer.^[8]

References

^ Ritchie, R. H. (June 1957). "Plasma Losses by Fast Electrons in Thin Films". Physical Review 106 (5): 874–881. doi:10.1103/PhysRev.106.874.
^ ^a ^b Raether, Heinz (1988). Surface Plasmons on Smooth and Rough Surfaces and on Gratings. Springer Tracts in Modern Physics 111. New York: Springer-Verlag. ISBN 0-387-17363-3. (Germany: ISBN 3-540-17363-3)
^ Cottam, Michael G. (1989). Introduction to Surface and Superlattice Excitations. New York: Cambridge University Press. ISBN 10-0521321549. (Germany: ISBN 10-0521321549)
^ Kittel, Charles (1996). Introduction to Solid State Physics (8th ed.). Hoboken, NJ: John Wiley & Sons. ISBN 0-471-41526-X.
^ ^a ^b Homola, Jirí (2006). Surface Plasmon Resonance Based Sensors. Springer Series on Chemical Sensors and Biosensors, 4. Berlin: Springer-Verlag. ISBN 3-540-33918-3.
^ (German) Kretschmann, E. (April 1974). "Die Bestimmung der Oberflächenrauhigkeit dünner Schichten durch Messung der Winkelabhängigkeit der Streustrahlung von Oberflächenplasmaschwingungen". Optics Communications 10 (4): 353–356. doi:10.1016/0030-4018(74)90362-9.
^ ^a ^b Kretschmann, E. (1972). "The angular dependence and the polarisation of light emitted by surface plasmons on metals due to roughness". Optics Communications 5 (5): 331–336. doi:10.1016/0030-4018(72)90026-0.
^ Minh Hiep, Ha (2007). "A localized surface plasmon resonance based immunosensor for the detection of casein in milk" (free download pdf). Science and Technology of Advanced Materials 8: 331. doi:10.1016/j.stam.2006.12.010. http://www.iop.org/EJ/article/1468-6996/8/4/A16/STAM_8_4_A16.pdf.

External links

http://www.plasmocom.org/presentations.html

This entry is from Wikipedia, the leading user-contributed encyclopedia. It may not have been reviewed by professional editors (see full disclaimer)

Donate to Wikimedia

	Which covers more surface area a flat surface or a bumpy surface? Read answer...
	Does a steel surface have a hotter surface than a wooden surface? Read answer...
	What reflective surfaces are there? Read answer...

	Are plasmon resonance phenomena analogous to electronic excitations in molecules?
	What is underyling physics behind excitation of surface plasmons at metal oxide interface?
	Can u help me in getting a seminar report on spin plasmonics?

Surface plasmon

Contents