Topping lift

A small schooner with its parts enumerated; the topping lift is shown joining near the end of the boom and the top of the main mast.

The topping lift (more rarely known as an uphaul) is a line which is part of the rigging on a sailboat; it applies upward force on a spar or boom. The most common topping lift on a modern sailboat is attached to the boom.

Topping lifts are primarily used to hold a boom up when the sail is lowered. [1] This line would run from near the free end of the boom(s) forward to the top of the mast. The line may be run over a block at the top of the mast and down to the deck to allow it to be adjusted. For small booms, the topping lift may be run from end of the boom to the backstay or next mast aft. When the sail is raised again, the topping lift is loosened or removed. On sailboats used for racing, boom lift function is frequently incorporated into the boom vang system, to reduce the number of lines aloft. Allowing the vang to take this function also simplifies operation of the boat. [2]