Transfer

This article needs additional citations for verification. Please help improve this article by adding reliable references. Unsourced material may be challenged and removed. (May 2008)

In computer technology, transfer and its more common derivatives gigatransfer (GT) and megatransfer (MT) refer to a number of data transfers (or operations). They are most commonly used for measuring transfer rates (usually as transfers per second, GT/s, MT/s, etc.). 1 GT/s means 10⁹ or one (US/short scale) billion transfers per second, while 1 MT/s is 10⁶ or one million transfers per second. In order to calculate the data transmission rate, one has to multiply the transfer rate by the information channel width. For example if we have a data bus of 8 bytes with transfer rate of 1 GT/s then the data rate would be 8x10⁹ bytes/s, or approximately 7.45 GiB/s.

The units usually refer to the "effective" number of transfers, or transfers perceived from "outside" of a system or component, as opposed to the internal speed or rate of the clock of the system. One example is a computer bus running at double data rate where data is transferred on both the rising and falling edge of the clock signal. If its internal clock runs at 100 MHz, then the effective rate is 200 MT/s, because there are 100 million rising edges per second and 100 million falling edges per second of a clock signal running at 100 MHz.

In the megatransfer range falls SCSI (Small Computer Systems Interface), while newer bus architectures like the front side bus, Quick Path Interconnect, PCI Express and HyperTransport operate at the rate of a few GT/s.

External links

• Megatransfer (definition)
• What does GT/s mean, anyway?

This computer-related article is a stub. You can help Wikipedia by expanding it. v • d • e