Light is a little complicated because various devices for producing it have various efficiencies. Light is measured in lumens. Older incandescent lamps produce 10-15 lumens per watt of electrical power. Halogen lamps produce maybe 20 lumens per watt and lasted much longer. Several years ago the best LEDs were also 20 lumens per watt. Now the best white LEDs are 5 to 10 times better than incandescent lamps, and they last for a decade or more. Expect almost all lamps to be LEDs in the next few years.
What you're asking is not possible. But here's a comparison (need to ask a specific question):
A LUXDOT MR16 LED max power is 6.1 watts, and is spec'd at 210 lumens at 37 degree flood angle, and neutral white coloring. This is a 12 volt light bulb.
You need to understand that LED's are very directionalized, unlike incandecent bulbs, meaning the light they emit is more like a flashlight than the typical overhead light you have in your living room. The more directionalized it is, the more light it will emit at that small area, just like a flashlight. This is the difference between lumens and lux (lux takes in brightness over a specific area, lumens does not).
An SLI incandecent 100 W bulb is rated at 1580 lumens.
So if you want to compare lumens, with no thought of room size, then ~8 of these LED's can provide the equivalent lumens. This may not be equivalent lux, though (I have never seen incandecent bulbs rated in lux).
If you want to look at energy usage, ~16 of these specific LED light bulbs use 100 watts
That is a very good question, so I ended up doing a little research on the internet to find the information. It appears in order to match the intensity of a 100watt light bulb, you'll need 15watts of LED light bulbs.
watt required will be less but you need to measure it intensity wise...
A 100 watt bulb equals zero volts.
55-watt
A 1,000 watt is 15,000 lumens. A 100 watt bulb is 1,500 lumens.
No. 480 lumens is about the output of a 40 watt light bulb, and that will not make a very good flood light.
It is equivalent to a 75 watt incandescent bulb
The number of lumens produced by a 34 watt bulb depends on the type of bulb. As a general estimation, a standard incandescent bulb produces around 400-500 lumens per 40 watts, so a 34 watt bulb would likely produce slightly fewer lumens, around 350-450 lumens. However, different bulb technologies such as LED or CFL can produce a higher number of lumens with lower wattage.
the NiteRider HID Firestorm produces 500 Lumens its bulb equals that of a 40watt incandesent bulb ,but with a much brighter white color
55-watt
A 1,000 watt is 15,000 lumens. A 100 watt bulb is 1,500 lumens.
1500
No. 480 lumens is about the output of a 40 watt light bulb, and that will not make a very good flood light.
Lol you cant invent the light bulb .It was already invented . Did you know that Thomas eddison did not invent the first eletirc light bulb but the first incandesent light bulb . It took him alought of research and work to invent ithe light bulb though .
25
It is equivalent to a 75 watt incandescent bulb
A lux or lumens meter or in terms of mesurements lux or lumens
The number of lumens produced by a 34 watt bulb depends on the type of bulb. As a general estimation, a standard incandescent bulb produces around 400-500 lumens per 40 watts, so a 34 watt bulb would likely produce slightly fewer lumens, around 350-450 lumens. However, different bulb technologies such as LED or CFL can produce a higher number of lumens with lower wattage.
Its about the Same as a 311 watt light bulb
In this context, Watts are a measure of electrical power and lumens a measure of light output. So, depending on the efficiency of your light source the equivalency will vary dramatically. For example, a 60 watt conventional light bulb typically gives off 800 lumens. A frosted 60 watt bulb may only give off 500 lumens. A 13 watt CFL will give off that same 800 lumens, which is why 13 watt CFLs are often (erroneously) called 60 watt bulbs.