hi I have changed starter on84 351 winsor,car starts and will for days;but within 3 days when I try starting it;the starter only spins,as though it is not engaging with the flywheel.
300-6 ,302-8 ,351w-8
same as 302 if memorey serves I believe that on boss 302, 351w, and also 400, the fireing order is 1-3-7-2-6-5-4-8.
10 degrees BTDC ( unless the engine compartment decal shows different )
There are different ways. One is that the 351w fuel pump bolts to the timing cover,the 351c bolts to the engine block. Water flows through the 351w intake manifold and does not on the 351c. The 351w has inline valves and the 351c has canted valves. The 351w has squared intake ports and the 351c has huge round ports. Hope this helps some.
Anything ispossible I ones swap a 351W to a Strait 6 Cyl.
no 351w's have 3" main bore size....and 302's have 2.5" mains
get a book
No, the 351m has a big block bolt pattern, and the 351w has a small block pattern, this caused some what of a problem for me seeing as I had 5 spd tranny off a 351w that I wanted to put on my 351m.
yes!
COUNTERCLOCKWISE
The simple difference between the 302 and 351w is simply deck height. The 351w is taller. They share a majority of interchanging components. Both the 302 and the 351w have a water cooled intake meaning a water bypass hose between the water pump and intake. The 351m would have an aircooled intake meaning no bypass hose. Also the head design of a 351m would make the engine look a lot larger (wider) than the 302/351w
First thing is count the valve cover bolts. If it has 6 then it is a 302 or 351.The 351W has a taller deck height than the 302. (a 302 will have the intake almost flush with the base of the distributor... where it goes into the block..... a 351w will have about 1/2 inch lip there where the intake meets the block.) The lower thermostat housing bolt on the 302 will be below the top of the water pump and you won't be able to put a socket on it. On the 351W you can remove the bolt with a socket. 351C manifolds are dry, no water passages or thermostat housing....thermostat housing goes into the front of the block. 351w uses 18mm spark plugs and the 351c uses 14mm spark plugs. 351w fuel pump bolts are on left & right sides. 351c fuel pump bolts are on the top & bottom.