Leave the motor there . Why do the extra work .
Yes, just remove the glove box, 5 or 6 small screws, turn sideways and wiggle it out.
same motor, same driveline, same size, just electronics differ a little ( such as a/c or power locks etc..).
TAKE A YAHOO SEARCH JUST TYPE 4 CYLINDER MOTER PICTURES.
The motor is not worth fixing. Go to a junkyard and just get a new one
motor is the same, transmission is diffrent... you need just the motor or you get a manual body but auto swap?
behind the motor.. between the motor and firewall, just above the cv shafts
go to http://www.fullsizechevy.com/forums/showthread.php?t=77200 I found this by accident, has step by step info. easer to just type in fullsizechevy.com and look around. good luck
If they have not changed from the '89, then take off the glove box door. Its there. Just remove all the small screws then pull it out.
have a friend with a fast car push the tempo or just trade it in for a better car. have a friend with a fast car push the tempo or just trade it in for a better car. have a friend with a fast car push the tempo or just trade it in for a better car. have a friend with a fast car push the tempo or just trade it in for a better car.
Which mount? front, transmission, rear. Take a good look at it, and have some air tools. Just have to unbolt, but you really do need the air impact.
It is on the back of the engine, just to the side of the distributor.
The windshield wiper motor is located just below the windshield wiper blades and is covered by a black panel.